Home › Drivetrain › U760F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH
RM30B0U _52 Drivetrain _009030 U760F AUTOMATIC TRANSMISSION / TRANSAXLE _0058578 PARK / NEUTRAL POSITION SWITCH G

U760F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

a.

Apply the parking brake.


b.

Turn the ignition switch to ON.


c.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.


d.

Check that the back-up light comes on when the shift lever is moved to R, but the light does not operate in any other position. If the operation cannot be done as specified, check the park/neutral position switch assembly for continuity.