1.INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
w/ Mirror Heater:
Check the outer mirror heater operation.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 25°C (77°F) | 5.4 to 8.1 Ω |
If the result is not as specified, replace the outer rear view mirror sub-assembly LH.
2.INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH
w/ Mirror Heater:
Check the outer mirror heater operation.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 25°C (77°F) | 5.4 to 8.1 Ω |
If the result is not as specified, replace the outer rear view mirror sub-assembly RH.