Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for RH Side)
RM30B0U _58 Vehicle Interior _009409 SEAT _0061282 REAR SEAT ASSEMBLY(for RH Side) A

SEAT  REAR SEAT ASSEMBLY(for RH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.


PROCEDURE

Hide 1.REMOVE REAR SEAT HEADREST ASSEMBLY

Hide 2.REMOVE REAR SEAT COVER CAP RH

a.
B340596
0.927,1.354 1.677,1.979 1.677,1.979 1.917,1.979 false 1.927,1.896 2.24,2.094 0.313,0.198 10 *1
*1 Protective Tape


Using a screwdriver, detach the 3 claws to remove the rear seat cover cap RH.

HINT:

Tape the screwdriver tip before use.



Hide 3.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

a.
B340934

Remove the 3 screws and reclining adjuster release handle RH.


Hide 4.REMOVE REAR SEAT NO. 1 CUSHION HINGE COVER

a.
B340597

Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 1 cushion hinge cover.


Hide 5.REMOVE REAR SEAT NO. 2 CUSHION HINGE COVER

a.
B340626

Detach the clamp.


b.
B340625

Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 2 cushion hinge cover.


Hide 6.REMOVE NO. 1 SEAT CUSHION ASSEMBLY RH

a.
B340598

Remove the 2 bolts and 2 bushes and then lift up the cushion as shown in the illustration.


b.
B340599
1.281,1.354 1.438,1.552 0.156,0.198 10 1 1.188,1.802 1.344,2 0.156,0.198 10 2

Detach the clamp of the cable end.


c.

Disconnect the cable in the order shown in the illustration.


d.
B340600

Remove the 3 clamps.


e.
B340601
2.156,0.948 2.292,0.344 2.292,0.344 2.594,0.344 false 2.635,0.208 2.948,0.406 0.313,0.198 10 *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

HINT:

Tape the screwdriver tip before use.



f.
B340602

Remove the 2 bolts, 2 bushes and No. 1 seat cushion assembly RH.


Hide 7.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

a.
B340603

Detach the 18 hooks and remove the separate type rear seat cushion cover (with pad) from the rear seat cushion frame sub-assembly RH.


b.
B340604

Remove the hog ring.


c.
B340605

Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad RH.


Hide 8.REMOVE REAR SEATBACK COVER RH

a.
B340608

Remove the clip and screw.


b.

Using a screwdriver, detach the claw to remove the rear seatback cover RH.


Hide 9.REMOVE REAR SEAT COVER

a.
B340607

Remove the clip and screw.


b.

Using a screwdriver, detach the claw to remove the rear seat cover.


Hide 10.REMOVE REAR SEAT CUSHION MOULDING RH

a.
B340606

Using a screwdriver, detach the claw and 2 clamps to remove the rear seat cushion moulding RH.


Hide 11.REMOVE REAR SEAT REAR CUSHION MOULDING RH

a.
B340609

w/ Seat belt warning system:

Detach the 2 clamps.


b.

Detach the claw and clamp to remove the rear seat rear cushion moulding RH.


Hide 12.REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

a.
B340610
0.115,0.625 0.271,0.823 0.156,0.198 10 1 3.271,0.656 3.427,0.854 0.156,0.198 10 1 0.219,0.813 0.375,1.01 0.156,0.198 10 2 3.198,0.938 3.354,1.156 0.156,0.219 10 2

Detach the 2 clamps of the cable ends.


b.

Disconnect the 2 cables in the order shown in the illustration.


c.

Detach the 4 clamps to remove the No. 2 seat adjuster control cable assembly.


Hide 13.REMOVE REAR SEAT CENTER LAP TYPE BELT ASSEMBLY RH

Hide 14.REMOVE REAR SEAT INNER BELT ASSEMBLY RH

Hide 15.REMOVE NO. 1 SEATBACK ASSEMBLY RH

a.
B340613

Remove the 2 bolts and No. 1 seatback assembly RH from the rear seat reclining adjuster assembly RH.


Hide 16.REMOVE REAR SEATBACK BOARD RH

a.
B340615

Remove the 4 hog rings and detach the 2 pieces of fastening tape.


b.
B340614

Detach the 5 claws and clamp to remove the rear seatback board RH.


Hide 17.REMOVE REAR SEAT HEADREST SUPPORT

a.
B340616

Detach the 4 claws to remove the 2 rear seat headrest supports.


Hide 18.REMOVE SEPARATE TYPE REAR SEATBACK COVER

a.
B340617

Detach the 2 clamps and remove the separate type rear seatback cover (with pad) from the rear seat cushion frame sub-assembly RH.


b.
B340618

Remove the 2 hog rings.


c.
B340619

Remove the 11 hog rings and separate type rear seatback cover from the rear seat cushion pad RH.