Home › General › SPECIFICATIONS › PARKING BRAKE
RM30B0U _V1 General _010968 SPECIFICATIONS _0062853 PARKING BRAKE F

SPECIFICATIONS  PARKING BRAKE  SERVICE DATA  


Parking Brake System
Parking brake lever travel Pull the lever upward with a force of approximately 200 N (20 kgf, 44 lbf) and count the number of clicks 6 to 8 clicks (without rear brake dragging)

Parking Brake Assembly
Brake disc inside diameter Standard 173 mm (6.81 in.)
Maximum 174 mm (6.85 in.)
Parking brake shoe lining thickness Standard 3.5 mm (0.138 in.)
Maximum 1.0 mm (0.0394 in.)