Home › General › SPECIFICATIONS › DRIVE SHAFT / PROPELLER SHAFT
RM30B0U _V1 General _010968 SPECIFICATIONS _0058323 DRIVE SHAFT / PROPELLER SHAFT F

SPECIFICATIONS  DRIVE SHAFT / PROPELLER SHAFT  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Front axle shaft nut x Front drive shaft assembly 292 2978 215
Front speed sensor x Steering knuckle 8.5 87 75
Front stabilizer link assembly x Front shock absorber 74 755 55
Front stabilizer link assembly x Front stabilizer bar 74 755 55
Front lower No. 1 suspension arm sub-assembly x Front lower ball joint Bolt 92 938 68
Nut 92 938 68
Flexible hose clamp bolt 18.5 189 14
Drive shaft bearing bracket setting bolt 32.4 330 24
Rear speed sensor x Rear axle carrier 8.5 87 75
Rear axle shaft nut x Rear drive shaft assembly 216 2203 159
Propeller with center bearing shaft assembly x Transfer assembly 35 357 26
Propeller with center bearing shaft assembly x Differential carrier assembly 35 357 26
Center support bearing x Body 36.8 375 27