Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM(for Radio and Display Type) › from 2013.11
RM30B0U _56 Audio / Visual / Telematics _009404 PARK ASSIST / MONITORING _0103949 REAR VIEW MONITOR SYSTEM(for Radio and Display Type) D

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Radio and Display Type)  SYSTEM DESCRIPTION  


GENERAL


a.

This system has a rear television camera assembly mounted on the back door to assist the driver in parking the vehicle by displaying an image of the area behind the vehicle. The system displays the image on the radio and display receiver assembly.


b.

This system consists of the following components:

i.

Radio and display receiver assembly


ii.

Rear television camera assembly


iii.

Park/neutral position switch assembly




FUNCTION OF COMPONENTS


a.

The radio and display receiver assembly controls the system by using information from the following components:

Components Function
Rear television camera assembly
·

Captures the view behind the vehicle and transmits the image to the radio and display receiver assembly.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and wide-angle lens.


Radio and display receiver assembly
·

Receives the video signals which contain an image of the area behind the vehicle taken with the rear television camera assembly.

·

Performs control of the system by receiving a shift position signal from the park/neutral position switch assembly.

·

Displays the rear view monitor image on the display panel.


Park/neutral position switch assembly Transmits a reverse signal to the radio and display receiver assembly.



OPERATION EXPLANATION


a.

The park/neutral position switch assembly outputs the R position signal to the radio and display receiver assembly when the shift lever is moved to R. After receiving the R position signal, the radio and display receiver assembly switches to the rear view monitor system.