Home › Engine / Hybrid System › 1AD-FTV ENGINE CONTROL › ECD SYSTEM › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008652 1AD-FTV ENGINE CONTROL _0048044 ECD SYSTEM CO CONTROL F

1AD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  STARTER CONTROL (CRANKING HOLD FUNCTION)  


FUNCTION


a.

Once the engine switch is pressed, this function continues to operate the starter until the engine starts, provided that the clutch pedal is pressed. This prevents starting failures and prevents the engine from being cranked after the engine has started.


b.

When the certification ECU detects a start signal, it monitors the engine speed signal (NE) from the ECM and operates the starter continuously until it determines that the engine has started completely.