Home › Engine / Hybrid System › 1AD-FTV ENGINE MECHANICAL › ENGINE UNIT › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008653 1AD-FTV ENGINE MECHANICAL _0048047 ENGINE UNIT DE DETAILS F

1AD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Each cylinder of this engine has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased due to the larger total port areas.


b.

This engine uses a valve rocker arm sub-assembly with built-in needle bearings. This reduces the friction that occurs between the cams and the valve rocker arm sub-assembly that push the valves down, thus improving fuel economy.


c.

A valve lash adjuster assembly, which maintains a constant 0 valve clearance through the use of oil pressure and spring force, is used.


d.

The exhaust camshaft is driven by a timing chain (chain sub-assembly), while the intake camshaft is driven through a gear on the exhaust camshaft.


e.

A supply pump assembly is driven by the exhaust camshaft to achieve a lightweight and compact design.


f.

A vacuum pump assembly is driven by the intake camshaft to achieve a lightweight and compact design.

W110522C01
5.344,0.563 5.563,0.281 5.563,0.281 5.802,0.281 true 5.458,1.01 5.625,1.302 5.625,1.302 5.865,1.302 true 4.958,2.229 5.177,1.948 5.177,1.948 5.417,1.948 true 3.99,1 4.177,0.438 4.177,0.438 4.417,0.438 true 3.344,1.479 3.344,0.323 3.344,0.323 3.583,0.323 true 3.104,1.354 2.906,0.365 2.906,0.365 2.635,0.365 true 2.396,1.552 2.198,0.563 2.198,0.563 1.927,0.563 true 2.031,1.365 1.625,1.104 1.625,1.104 1.438,1.104 true 2.01,2.271 1.635,1.99 1.635,1.99 1.396,1.99 true 2.177,2.781 1.677,3 1.677,3 1.49,3 true 2.427,2.594 2.646,2.313 2.646,2.313 2.885,2.313 true 3.51,1.906 4.167,3.708 4.167,3.708 4.406,3.708 true 3.771,1.875 4.448,3.063 4.448,3.063 4.688,3.063 true 3.615,0.24 3.927,0.396 0.313,0.156 10 *1 2.479,0.281 2.792,0.438 0.313,0.156 10 *2 1.771,0.49 2.083,0.646 0.313,0.156 10 *3 1.271,1.031 1.583,1.188 0.313,0.156 10 *4 1.229,1.917 1.542,2.073 0.313,0.156 10 *5 1.323,2.927 1.635,3.083 0.313,0.156 10 *6 4.469,0.365 4.781,0.521 0.313,0.156 10 *7 4.729,2.979 5.042,3.135 0.313,0.156 10 *8 4.458,3.625 4.771,3.781 0.313,0.156 10 *9 2.917,2.24 3.385,2.396 0.469,0.156 10 *10 5.875,0.208 6.344,0.365 0.469,0.156 10 *11 5.917,1.219 6.385,1.375 0.469,0.156 10 *12 5.458,1.875 5.927,2.031 0.469,0.156 10 *13
*1 Intake Camshaft *2 Exhaust Camshaft
*3 Vacuum Pump Assembly *4 Timing Chain (Chain Sub-assembly)
*5 No. 1 Chain Tensioner Assembly *6 Chain Tensioner Slipper
*7 Supply Pump Assembly *8 Intake Valve
*9 Exhaust Valve *10 No. 1 Chain Vibration Damper
*11 Valve Rocker Arm Sub-assembly *12 Valve Lash Adjuster Assembly
*13 Valve - -


W100170E04
2.969,0.76 2.76,0.344 2.76,0.344 2.635,0.344 true 4.76,0.292 6.656,0.698 1.896,0.406 10 : Intake valve opening angle 4.771,0.802 6.771,1.25 2,0.448 10 : Exhaust valve opening angle 2.781,0.719 3.052,1.125 0.271,0.406 10 2° 3.063,0.729 3.333,1.135 0.271,0.406 10 2° 2.229,3.052 2.521,3.458 0.292,0.406 10 31° 3.781,2.948 4.073,3.354 0.292,0.406 10 51° 2.844,3.219 3.188,3.583 0.344,0.365 10 BDC 2.333,0.26 2.677,0.615 0.344,0.354 10 TDC