Home › Engine / Hybrid System › 1AD-FTV ENGINE MECHANICAL › ENGINE UNIT › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008653 1AD-FTV ENGINE MECHANICAL _0048047 ENGINE UNIT DE DETAILS F

1AD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT AND BEARING  


CONSTRUCTION


a.

A crankshaft made of forged steel, which excels in rigidity and wear resistance, is used.


b.

The crankshaft has 5 journals, 4 crank pins and 8 balance weights.

W100174C01
2.469,0.719 2.677,0.271 2.677,0.271 2.906,0.271 true 4.188,0.667 4.375,0.271 4.375,0.271 4.604,0.271 true 1.469,2.146 1.677,2.146 1.677,2.146 1.99,1.552 true 6.25,2.25 5.969,2.25 5.969,2.25 5.844,1.583 true 1.281,2.063 1.594,2.219 0.313,0.156 10 *1 4.656,0.198 4.969,0.354 0.313,0.156 10 *2 6.302,2.177 6.635,2.458 0.333,0.281 10 *3 0.865,1.24 1.177,1.396 0.313,0.156 10 *a 2.958,0.188 3.271,0.344 0.313,0.156 10 *b
*1 No. 1 Journal *2 Balance Weight
*3 No. 5 Journal - -
*a Engine Front *b Oil Hole



c.

The crankshaft bearings have been optimized in width to reduce friction.


d.

An oil groove is provided on each crankshaft bearing (upper main bearing). The oil groove is deep at the center and is shallow at the edges to reduce the amount of oil that leaks from the crankshaft bearing. As a result, the size of the oil pump is reduced, minimizing friction.

W110541C01
2.875,0.813 2.979,0.333 2.979,0.333 3.208,0.333 true 2.156,0.958 1.813,0.458 1.813,0.458 1.573,0.458 true 2.25,1.927 2.021,2.365 2.021,2.365 1.76,2.365 true 3.25,0.26 3.563,0.417 0.313,0.156 10 *1 1.594,2.281 1.906,2.438 0.313,0.156 10 *2 1.396,0.375 1.708,0.531 0.313,0.156 10 *a 5.042,0.74 5.354,0.896 0.313,0.156 10 *b 4,1.417 4.313,1.573 0.313,0.156 10 *c 5.021,1.927 5.333,2.083 0.313,0.156 10 *d 6.042,1.417 6.354,1.573 0.313,0.156 10 *c
*1 Upper Main Bearing *2 Lower Main Bearing
*a Oil Groove *b Center
*c Edge *d Oil Groove Depth