Home › Engine / Hybrid System › 1AD-FTV ENGINE MECHANICAL › ENGINE UNIT › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008653 1AD-FTV ENGINE MECHANICAL _0048047 ENGINE UNIT DE DETAILS F

1AD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSTRUCTION


a.

A bushed chain with a 9.525 mm (0.375 in.) pitch is used to make the engine more compact and to achieve a maintenance-free operation.


b.

A chain oil jet lubricates the timing chain.


c.

The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times. A ratchet type assembly with backlash mechanism is used.


d.

The chain tensioner suppresses noise generated by the chain.

W110523C01
2.104,1.531 2.365,0.792 2.365,0.792 2.146,0.792 true 1.719,1.615 1.448,1.021 1.448,1.021 1.229,1.021 true 1.813,1.958 1.625,2.615 1.625,2.615 1.406,2.615 true 2.031,1.99 2.167,2.385 2.167,2.385 2.417,2.385 true 3.292,0.542 3.031,0.302 3.031,0.302 2.813,0.302 true 3.313,1.802 3.115,2.167 3.115,2.167 2.896,2.167 true 4.146,2.958 5.115,2.177 5.115,2.177 5.365,2.177 true 1.979,0.719 2.292,0.875 0.313,0.156 10 *1 1.063,0.938 1.375,1.094 0.313,0.156 10 *2 1.25,2.542 1.563,2.698 0.313,0.156 10 *3 2.448,2.313 2.76,2.469 0.313,0.156 10 *4 2.646,0.229 2.958,0.385 0.313,0.156 10 *5 2.74,2.094 3.052,2.25 0.313,0.156 10 *6 5.427,2.104 5.74,2.26 0.313,0.156 10 *7
*1 Plunger *2 Plunger Spring
*3 Cam Spring *4 Cam
*5 Timing Chain (Chain Sub-assembly) *6 No. 1 Chain Tensioner Assembly
*7 Chain Oil Jet - -