Home › Engine / Hybrid System › 1AD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008655 1AD-FTV EMISSION CONTROL _0048080 EMISSION CONTROL SYSTEM DE DETAILS F

1AD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  DETAILS  EXHAUST FUEL ADDITION INJECTOR  


CONSTRUCTION


a.

An exhaust fuel addition injector is installed on the No. 4 exhaust port of the cylinder head. This injector supplies additional fuel into the No. 4 exhaust port and maintains the proper catalyst temperature for the purpose of PM regeneration.


b.

The exhaust fuel addition injector consists of a needle valve body, a needle valve and a solenoid valve.

W100363C02
3.688,1.865 3.094,1.865 true 3.604,2.51 3.063,2.51 true 3.49,1.167 2.792,1.302 2.792,1.302 2.521,1.302 true 2.354,1.24 2.604,1.604 0.25,0.365 10 *1 2.906,1.781 3.156,2.146 0.25,0.365 10 *2 2.896,2.438 3.146,2.708 0.25,0.271 10 *3
*1 Solenoid Valve *2 Needle Valve
*3 Needle Valve Body - -