Home › Engine / Hybrid System › 1AD-FTV LUBRICATION › LUBRICATION SYSTEM › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008658 1AD-FTV LUBRICATION _0048092 LUBRICATION SYSTEM GE GENERAL F

1AD-FTV LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and all oil passes through an oil filter.


b.

The trochoid gear type oil pump is driven directly by the crankshaft.


c.

The chamber for the oil pump rotor is placed in the timing chain cover to achieve a simpler construction and a more compact engine.


d.

A water-cooled type engine oil cooler is used to lower the oil temperature.


e.

A resin oil strainer is used to reduce weight.


f.

An oil nozzle is provided for cooling the piston.


g.

An oil filter with a replaceable element is used.


h.

A 2-stage hydraulic system is used.

W110536C01
1.771,2.635 1.979,2.635 1.979,2.635 2.635,3.188 true 2.375,4.49 2.583,4.49 2.583,4.49 3.073,4.26 true 3.24,4.125 3.677,4.583 3.677,4.583 3.875,4.583 true 3.688,3.885 4.125,4.344 4.125,4.344 4.323,4.344 true 4.49,2.25 5.24,3.073 5.24,3.073 5.479,3.073 true 1.594,2.552 1.906,2.708 0.313,0.156 10 *1 2.198,4.406 2.51,4.563 0.313,0.156 10 *2 3.917,4.49 4.229,4.646 0.313,0.156 10 *3 4.375,4.271 4.688,4.427 0.313,0.156 10 *4 5.51,3 5.823,3.156 0.313,0.156 10 *5
*1 Oil Pump *2 Oil Filter
*3 Oil Pressure Switching Valve Assembly *4 Oil Strainer Sub-assembly
*5 Oil Cooler Assembly - -