Home › Engine / Hybrid System › 2AD-FHV ENGINE CONTROL › ECD SYSTEM
NM3090E _51 Engine / Hybrid System _008668 2AD-FHV ENGINE CONTROL _0048046 ECD SYSTEM CO CONTROL F

2AD-FHV ENGINE CONTROL  ECD SYSTEM  CONTROL  FUEL PRESSURE CONTROL  


FUNCTION


a.

The ECM calculates the target injection pressure (25 MPa to 200 MPa) based on the engine operating conditions, which include the signals from the accelerator pedal sensor assembly and the crankshaft position sensor. In order to control the fuel pressure, the SCV of the supply pump controls the pumping volume. Also, when the pressure is extremely high, when sudden deceleration occurs or when the engine is stopped, the pressure discharge valve installed on the common-rail controls the discharge volume. This ensures that the pressure detected by the fuel pressure sensor matches the target injection pressure.

W100202E04
1.531,0.323 2.729,0.865 1.198,0.542 10 Crankshaft Position Sensor 3.198,0.292 4.792,0.854 1.594,0.563 10 Accelerator Pedal Sensor Assembly 2.229,1.719 3.677,2.344 1.448,0.625 10 Calculation of Target Common-rail Pressure 2.26,3.083 3.719,3.375 1.458,0.292 10 Fuel Pressure Sensor 0.875,3.927 1.25,4.208 0.375,0.281 10 SCV 2.479,3.823 3.344,4.438 0.865,0.615 10 Common-rail Assembly 4.51,3.833 5.802,4.458 1.292,0.625 10 Pressure Discharge Valve 4.688,5.146 5.635,5.417 0.948,0.271 10 Injector Driver 2.323,5.135 3.563,5.479 1.24,0.344 10 Injector Assembly 1.813,1.302 2.177,1.552 0.365,0.25 10 ECM