Home › Engine / Hybrid System › 2AD-FTV ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008661 2AD-FTV ENGINE MECHANICAL _0048049 ENGINE UNIT DE DETAILS F

2AD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The pistons are made of aluminum alloy.


b.

Combustion chambers are provided on the pistons for direct injection.


c.

The shape of the combustion chamber has been optimized to achieve a low compression ratio, high engine output and low fuel consumption.


d.

A cooling channel is provided to achieve excellent piston cooling performance.


e.

To improve the wear resistance of the top ring groove, a Ni-resist cast iron ring carrier is used.


f.

Along with the improved engine performance, the piston skirt is applied with a resin coating to reduce friction loss.


g.

Due to increased machining precision of the cylinder bore diameter, it is not necessary to prepare pistons with different diameters.

W110521C01
2.615,1.188 2.844,0.417 2.844,0.417 3.104,0.417 true 4.552,1.208 4.948,0.625 4.948,0.625 5.208,0.625 true 4.073,1.313 4.021,0.729 4.021,0.729 3.771,0.729 true 4.208,1.615 3.854,1.375 3.854,1.375 3.604,1.375 true 3.156,0.344 3.469,0.5 0.313,0.156 10 *a 3.604,0.656 3.917,0.813 0.313,0.156 10 *b 5.229,0.542 5.542,0.698 0.313,0.156 10 *c 3.438,1.292 3.75,1.448 0.313,0.156 10 *d
*a Front Mark *b Ni-resist Cast Iron Ring Carrier
*c Combustion Chamber *d Cooling Channel
V100144

Resin Coating - -