Home › Engine / Hybrid System › 2AD-FTV ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008661 2AD-FTV ENGINE MECHANICAL _0048049 ENGINE UNIT DE DETAILS F

2AD-FTV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

The connecting rod sub-assemblies and caps are made of high-strength steel for weight reduction.


b.

Knock pins are used at the mating surfaces of the bearing caps of the connecting rod to minimize the shifting of the bearing caps during assembly.


c.

Plastic region tightening bolts are used on the connecting rods.


d.

The connecting rod bearings are reduced in width to reduce friction.

W100169C01
2.521,3.229 2.833,3.229 2.833,3.229 3.135,2.802 true 4.615,1.823 4.344,1.823 4.344,1.823 3.99,2.385 true 2.344,3.156 2.656,3.313 0.313,0.156 10 *1 4.667,1.76 4.979,1.917 0.313,0.156 10 *2
*1 Plastic Region Tightening Bolt *2 Knock Pin