Home › Engine / Hybrid System › 2AD-FHV ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008669 2AD-FHV ENGINE MECHANICAL _0048048 ENGINE UNIT DE DETAILS F

2AD-FHV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE LASH ADJUSTER  


CONSTRUCTION


a.

The valve lash adjuster assembly, which is located at the fulcrum of the valve rocker arm sub-assembly, consists primarily of a plunger, a plunger spring, a check ball and a check ball spring.


b.

The engine oil supplied by the cylinder head sub-assembly and the built-in spring actuates the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance created during the opening and closing of the valve. As a result, engine noise has been reduced.

W100171C01
5,0.896 5.167,0.344 5.167,0.344 5.427,0.344 true 1.99,2.625 1.427,2.292 1.427,2.292 1.167,2.292 true 2,2.5 1.417,1.854 1.417,1.854 1.156,1.854 true 4.458,1.479 3.948,0.542 3.948,0.542 3.688,0.542 true 1.875,2.792 1.458,2.99 1.458,2.99 1.198,2.99 true 4.344,1.688 3.531,1.115 3.531,1.115 3.271,1.115 true 2.167,1.063 2.333,0.51 2.333,0.51 2.594,0.51 true 4.823,1.406 5.792,1.885 5.792,1.885 6.052,1.885 true 1.729,1.969 1.417,1.458 1.417,1.458 1.156,1.458 true 2.656,0.448 2.969,0.604 0.313,0.156 10 *1 1,1.365 1.313,1.521 0.313,0.156 10 *2 1.021,2.219 1.333,2.375 0.313,0.156 10 *4 1.052,2.917 1.365,3.073 0.313,0.156 10 *5 3.531,0.469 3.844,0.625 0.313,0.156 10 *6 5.5,0.281 5.813,0.438 0.313,0.156 10 *7 6.115,1.813 6.427,1.969 0.313,0.156 10 *8 3.104,1.031 3.417,1.188 0.313,0.156 10 *2 1,1.771 1.313,1.927 0.313,0.156 10 *3
*1 Plunger *2 Oil Passage
*3 Check Ball *4 Check Ball Spring
*5 Plunger Spring *6 Valve Lash Adjuster Assembly
*7 Cam *8 Valve Rocker Arm Sub-assembly


HINT:

Valve clearance adjustment is not necessary because a valve lash adjuster assembly is used. After reassembling the valve lash adjuster assembly, the fluid should be changed.