Home › Engine / Hybrid System › 2AD-FHV ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008669 2AD-FHV ENGINE MECHANICAL _0048048 ENGINE UNIT DE DETAILS F

2AD-FHV ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSTRUCTION


a.

A bushed chain with a 9.525 mm (0.375 in.) pitch is used to make the engine more compact and to achieve a maintenance-free operation.


b.

A chain oil jet lubricates the timing chain.


c.

The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times. A ratchet type assembly with backlash mechanism is used.


d.

The chain tensioner suppresses noise generated by the chain.

W100194
2.125,1.552 2.292,0.844 2.292,0.844 2.073,0.844 true 1.75,1.625 1.5,1.052 1.5,1.052 1.281,1.052 true 1.802,1.969 1.552,2.583 1.552,2.583 1.375,2.583 true 2.031,1.979 2.146,2.208 2.146,2.208 2.313,2.208 true 3.292,0.531 3.052,0.25 3.052,0.25 2.865,0.25 true 3.313,1.844 3.115,2.083 3.115,2.083 2.969,2.083 true 4.167,2.958 4.938,2.24 4.938,2.24 5.167,2.24 true 1.906,0.76 2.167,1.167 0.26,0.406 10 *1 1.083,0.969 1.344,1.375 0.26,0.406 10 *2 1.198,2.5 1.458,2.906 0.26,0.406 10 *3 2.354,2.125 2.615,2.531 0.26,0.406 10 *4 2.698,0.177 2.958,0.583 0.26,0.406 10 *5 2.781,2 3.042,2.406 0.26,0.406 10 *6 5.219,2.146 5.479,2.552 0.26,0.406 10 *7
*1 Plunger *2 Plunger Spring
*3 Cam Spring *4 Cam
*5 Timing Chain (Chain Sub-assembly) *6 No. 1 Chain Tensioner Assembly
*7 Chain Oil Jet - -