Home › Engine / Hybrid System › 2AD-FTV FUEL › FUEL SYSTEM
NM3090E _51 Engine / Hybrid System _008662 2AD-FTV FUEL _0048079 FUEL SYSTEM DE DETAILS F

2AD-FTV FUEL  FUEL SYSTEM  DETAILS  COMMON-RAIL  


CONSTRUCTION


a.

The function of the common-rail assembly is to store the fuel that has been pressurized by the supply pump assembly. The common-rail assembly is provided with a fuel pressure sensor that detects the fuel pressure in the common-rail, and a pressure discharge valve which regulates the fuel pressure.


b.

Internally, the common-rail assembly contains a main hole and 5 branch holes that intersect the main hole. Each branch hole functions as an orifice that dampens the fluctuation of the fuel pressure.


c.

In the pressure discharge valve, the plunger opens and closes in accordance with the actuation signals from the injector driver. Thus, the pressure discharge valve regulates pressure by releasing excess pressure from the common-rail assembly. In addition, the pressure discharge valve has a pressure reduction function in case of emergency.

W100182E02
4.708,0.594 4.51,0.292 4.51,0.292 4.323,0.292 true 3.833,2.906 3.646,3.385 3.646,3.385 3.396,3.385 true 5.604,3.042 5.604,3.396 5.604,3.396 5.448,3.396 true 2.521,2.802 2.208,3.375 2.208,3.375 1.917,3.375 true 1.01,2.177 1.167,2.177 1.167,2.177 1.26,2.688 true 1.229,0.979 4.115,1.333 2.885,0.354 10 From Common-rail Assembly (High Pressure) 0.104,2.083 0.99,2.604 0.885,0.521 10 Fuel Pressure Sensor 1.073,3.292 1.917,3.583 0.844,0.292 10 Branch Hole 2.698,3.302 3.396,3.635 0.698,0.333 10 Main Hole 3.833,3.313 5.667,3.635 1.833,0.323 10 Pressure Discharge Valve 0.521,0.135 2.563,0.531 2.042,0.396 10 : From supply pump 0.531,0.552 2.573,0.958 2.042,0.406 10 : To injector assembly 2.844,0.198 4.313,0.906 1.469,0.708 10 To Fuel Tank Assembly (Excess Pressure)

HINT:

Because the fuel pressure sensor uses a plastic-deformed sealing portion to ensure sealing performance, it cannot be reused after disassembling. The fuel pressure sensor and pressure discharge valve are supplied as a set with the common-rail assembly. Do not disassemble the fuel pressure sensor and pressure discharge valve. Also, if parts that affect the alignment have been changed, make sure to replace the pipe with a new one as well. The parts that require the replacement of a pipe are listed below:

·

Injection pipe: injector, common-rail, cylinder head and intake manifold

·

Fuel inlet pipe: supply pump, common-rail, cylinder head and intake manifold


For details, refer to the Repair Manual.