Home › Engine / Hybrid System › 2AD-FTV INTAKE / EXHAUST › INTAKE SYSTEM
NM3090E _51 Engine / Hybrid System _008664 2AD-FTV INTAKE / EXHAUST _0048087 INTAKE SYSTEM DE DETAILS F

2AD-FTV INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  TURBOCHARGER  


CONSTRUCTION


a.

The variable nozzle vane type turbocharger sub-assembly consists primarily of a turbine, nozzle vane, unison ring and actuator.


b.

The variable nozzle vane type turbocharger sub-assembly drives the vacuum type actuator in accorcance with the engine condition, and controls the nozzle vane in order to achieve high engine output, low fuel consumption and low emissions.


c.

The turbocharger sub-assembly is cooled by the engine oil.

W100373
2.708,0.781 2.656,0.417 2.656,0.417 2.469,0.417 true 1.188,1.51 0.927,2.417 0.927,2.417 0.719,2.417 true 1.677,1.635 1.479,2.531 1.479,2.531 1.25,2.531 true 2.448,1.948 2.5,2.198 2.5,2.198 2.729,2.198 true 5.083,1.396 4.865,0.438 4.865,0.438 4.635,0.438 true 5.854,1.406 5.594,0.323 5.594,0.323 5.396,0.323 true 1.833,1.229 1.792,0.406 1.792,0.406 1.583,0.406 true 2.313,0.323 2.521,0.667 0.208,0.344 10 *1 0.531,2.313 0.74,2.656 0.208,0.344 10 *3 1.073,2.448 1.281,2.75 0.208,0.302 10 *4 2.76,2.104 2.969,2.448 0.208,0.344 10 *5 4.469,0.344 4.677,0.688 0.208,0.344 10 *6 5.219,0.24 5.427,0.583 0.208,0.344 10 *4 1.406,0.323 1.615,0.667 0.208,0.344 10 *2
*1 Actuator *2 VGS Link Plate
*3 Nozzle Vane *4 Turbine Wheel
*5 Actuator Linkage *6 Impeller Wheel



d.

The exhaust gas from the exhaust manifold goes through the nozzle vane inside the turbocharger housing, and flows to the exhaust pipe through the turbine. The speed of the turbine (supercharging pressure) differs depending on the flow velocity of the exhaust gas going through the turbine. The flow velocity of the exhaust gas is controlled by the nozzle vane opening.

W100374E02
2.99,1.406 2.771,1.844 2.771,1.844 2.594,1.844 true 4.24,1.208 4.521,0.74 4.521,0.74 4.656,0.74 true 4.469,1.323 4.583,1.781 4.583,1.781 4.792,1.781 true 4.115,1.823 4.438,2.302 4.438,2.302 4.646,2.302 true 2.542,0.24 3.573,0.594 1.031,0.354 10 : Exhaust gas 3.927,0.24 4.677,0.563 0.75,0.323 10 : Intake air 1.646,1.76 2.708,2.083 1.063,0.323 10 Impeller Wheel 4.698,0.656 5.698,1.01 1,0.354 10 Turbine Wheel 4.833,1.698 5.979,2.01 1.146,0.313 10 To Exhaust Pipe 4.688,2.219 5.594,2.552 0.906,0.333 10 Nozzle Vane



OPERATION


a.

At Low Load Range or Low Speed Range

i.

When the engine is running in a low load range or a low speed range, the actuator pulls up the actuator linkage. The actuator linkage is connected to the unison ring. At the same time, the drive arms installed in the unison ring move to change the nozzle vane angle toward closing direction. As a result, the exhaust gas travels to the turbine at a faster speed, and engine torque is improved.

W100375
6.104,0.896 6,0.219 6,0.219 6.125,0.219 true 6.135,1.896 6.26,2.229 6.26,2.229 6.396,2.229 true 4.542,1.656 4.354,1.656 true 4.458,0.802 4.458,0.333 4.458,0.333 4.698,0.333 true 3.135,1.281 3.188,0.406 3.188,0.406 3.396,0.406 true 3.417,1.656 2.917,2.49 2.917,2.49 2.708,2.49 true 0.99,0.854 1.542,0.333 1.542,0.333 1.323,0.333 true 0.479,1.427 0.51,2.052 0.51,2.052 0.677,2.052 true 0.156,0.24 1.427,0.552 1.271,0.313 10 false Exhaust Gas Flow 0.74,1.958 1.667,2.271 0.927,0.313 10 false Nozzle Vane 3.458,0.323 4.375,0.656 0.917,0.333 10 false Nozzle Vane 1.781,2.406 2.833,2.74 1.052,0.333 10 false Turbine Wheel 4.75,0.25 5.396,0.573 0.646,0.323 10 false Actuator 4.604,1.563 5.688,1.958 1.083,0.396 10 false Actuator Linkage 6.458,2.146 7.156,2.542 0.698,0.396 10 false Drive Arm 6.198,0.177 7.073,0.542 0.875,0.365 10 false VGS Link Plate



b.

At High Load Range or High Speed Range

i.

When the engine is running in a high load range or a high speed range, the actuator pulls down the actuator linkage. With this, the drive arm moves, opens the nozzle vane and holds the specified supercharging pressure. Thus, exhaust gas back pressure is lowered, and output and fuel consumption are improved.

W100376
1.063,0.792 1.521,0.313 1.521,0.313 1.292,0.313 true 0.51,2.156 0.302,2.156 0.302,2.156 0.448,1.417 true 3.458,0.344 3.25,0.344 3.25,0.344 3.177,1.177 true 3.385,1.708 3.031,2.51 3.031,2.51 2.802,2.51 true 4.885,0.333 4.677,0.333 4.677,0.333 4.531,0.781 true 4.719,1.615 4.573,1.615 4.573,1.615 4.375,1.688 true 6.042,0.323 5.833,0.323 5.833,0.323 6.01,0.885 true 6.198,2.385 5.99,2.385 5.99,2.385 6.052,1.875 true 6.115,0.271 7.125,0.563 1.01,0.292 10 false VGS Link Plate 0.115,0.219 1.458,0.51 1.344,0.292 10 false Exhaust Gas Flow 3.51,0.281 4.385,0.552 0.875,0.271 10 false Nozzle Vane 1.885,2.427 2.885,2.646 1,0.219 10 false Turbine Wheel 4.76,1.531 5.323,1.948 0.563,0.417 10 false Actuator Linkage 4.948,0.26 5.542,0.5 0.594,0.24 10 false Actuator 6.25,2.302 6.948,2.521 0.698,0.219 10 false Drive Arm 0.573,2.083 1.448,2.354 0.875,0.271 10 false Nozzle Vane