Home › Engine / Hybrid System › 2AD-FHV LUBRICATION › LUBRICATION SYSTEM
NM3090E _51 Engine / Hybrid System _008674 2AD-FHV LUBRICATION _0048093 LUBRICATION SYSTEM GE GENERAL F

2AD-FHV LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and all oil passes through an oil filter.


b.

The trochoid gear type oil pump is driven directly by the crankshaft.


c.

The chamber for the oil pump rotor is placed in the timing chain cover to achieve a simpler construction and a more compact engine.


d.

A water-cooled type engine oil cooler is used to lower the oil temperature.


e.

A resin oil strainer is used to reduce weight.


f.

An oil nozzle is provided for cooling the piston.


g.

An oil filter with a replaceable element is used.

W100388
2.615,3.125 1.875,2.448 1.875,2.448 1.646,2.448 true 2.958,4.198 2.729,4.448 2.729,4.448 2.479,4.448 true 4.51,2.219 5.219,2.823 5.219,2.823 5.438,2.823 true 3.792,4.01 4.094,4.469 4.094,4.469 4.323,4.469 true 1.479,2.365 1.698,2.75 0.219,0.385 10 *1 2.313,4.354 2.521,4.708 0.208,0.354 10 *2 4.375,4.375 4.594,4.646 0.219,0.271 10 *3 5.5,2.75 5.719,3.104 0.219,0.354 10 *4
*1 Oil Pump *2 Oil Filter
*3 Oil Strainer Sub-assembly *4 Oil Cooler Assembly