Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM
NM3090E _51 Engine / Hybrid System _008626 2AR-FE ENGINE CONTROL _0048050 SFI SYSTEM DE DETAILS F

2AR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS) CONTROL  


OPERATION


a.

When Intake Air Control Valve Closed (VSV On)

i.

The ECM activates the VSV to match the longer pulsation cycle so that the negative pressure acts on the diaphragm chamber of the actuator. This closes the intake air control valve. As a result, the effective length of the intake manifold is increased and the intake efficiency in the medium speed range is improved due to the dynamic effect of the intake air, thereby increasing the power output.

W110961
0.865,2.406 2.833,2.74 1.969,0.333 10 : Effective intake manifold length 4.333,0.5 4.698,0.792 0.365,0.292 10 Open 4,1.042 4.5,1.708 0.5,0.667 10 Throttle Valve 4.229,1.875 4.688,2.229 0.458,0.354 10 Closed 5.438,2.302 6.365,2.656 0.927,0.354 10 Engine Speed 4.708,2.094 5.167,2.448 0.458,0.354 10 Low 6.583,2.073 7.042,2.427 0.458,0.354 10 High 5.573,0.667 6.177,0.948 0.604,0.281 10 VSV On



b.

When Intake Air Control Valve Open (VSV Off)

i.

The ECM deactivates the VSV to match the shorter pulsation cycle so that atmospheric air is led into the diaphragm chamber of the actuator and opens the intake air control valve. When the intake air control valve is open, the effective length of the intake air chamber is shortened and peak intake efficiency is shifted to the low-to-high engine speed range, thus providing greater output at low-to-high engine speeds.

W110962
0.854,2.385 2.854,2.688 2,0.302 10 : Effective intake manifold length 4.292,0.583 4.708,0.865 0.417,0.281 10 Open 3.885,1.104 4.479,1.531 0.594,0.427 10 Throttle Valve 4.24,1.948 4.729,2.271 0.49,0.323 10 Closed 5.469,2.354 6.365,2.615 0.896,0.26 10 Engine Speed 4.719,2.073 5.104,2.354 0.385,0.281 10 Low 6.448,2.063 6.833,2.344 0.385,0.281 10 High 5.583,1.396 6.188,1.677 0.604,0.281 10 VSV Off