Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

Each controller consists of a housing driven by the timing chain and a vane coupled with the intake or exhaust camshaft.


b.

Both the intake and exhaust sides have a four-blade vane.


c.

The oil pressure sent from the advanced or retarded side path at the intake and exhaust camshafts causes rotation in the VVT-i controller vane circumferential direction to vary the intake and exhaust valve timing continuously.


d.

When the engine is stopped, a lock pin locks the intake camshaft at the most retarded end and the exhaust camshaft at the most advanced end to ensure that the engine starts properly.


e.

An advance assist spring is provided on the exhaust side VVT-i controller. This spring applies torque in the advance direction when the engine is stopped, thus ensuring the engagement of the lock pin.

W111545
2.719,0.688 2.927,0.688 2.927,0.688 3.094,1 true 3.938,0.448 4.146,0.448 4.146,0.448 4.313,0.76 true 4.667,0.26 4.49,0.26 4.49,0.26 4.49,0.854 true 5.771,1.813 5.552,1.813 5.552,1.813 5.365,1.49 true 6.458,1.344 6.24,1.344 6.24,1.344 6.052,1.021 true 1.927,4.5 2.156,4.5 2.156,4.5 2.156,5.417 true 2.771,4.469 2.979,4.469 2.979,4.469 3.146,4.781 true 3.792,4.25 4,4.25 4,4.25 4.167,4.563 true 4.479,4.125 4.292,4.125 4.292,4.125 4.292,4.656 true 5.719,5.708 5.5,5.708 5.5,5.708 5.313,5.385 true 6.448,5.167 6.229,5.167 6.229,5.167 6.042,4.844 true 0.25,0.125 0.563,0.281 0.313,0.156 10 *1 2.531,0.594 2.844,0.75 0.313,0.156 10 *2 3.75,0.365 4.063,0.521 0.313,0.156 10 *3 4.51,4.063 4.823,4.219 0.313,0.156 10 *4 5.802,1.74 6.115,1.896 0.313,0.156 10 *5 6.521,1.271 6.833,1.427 0.313,0.156 10 *6 4.781,3.323 5.094,3.479 0.313,0.156 10 *a 5.698,3.354 6.01,3.51 0.313,0.156 10 *b 4.365,2.5 4.677,2.656 0.313,0.156 10 *4 1.76,4.417 2.073,4.573 0.313,0.156 10 *8 0.229,4.01 0.542,4.167 0.313,0.156 10 *7 2.604,4.375 2.917,4.531 0.313,0.156 10 *2 3.615,4.167 3.927,4.323 0.313,0.156 10 *9 5.75,5.625 6.063,5.781 0.313,0.156 10 *5 6.479,5.073 6.792,5.229 0.313,0.156 10 *10 4.698,0.198 5.01,0.354 0.313,0.156 10 *4
*1 Intake Side VVT-i Controller *2 Housing
*3 Vane (Fixed on Intake Camshaft) *4 Lock Pin
*5 Sprocket *6 Intake Camshaft
*7 Exhaust Side VVT-i Controller *8 Advance Assist Spring
*9 Vane (Fixed on Exhaust Camshaft) *10 Exhaust Camshaft
*a At a Stop *b In Operation
V100135

Oil Pressure - -