Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The piston is made of aluminum alloy and the skirt area is made compact and lightweight.


b.

The piston head portion uses a taper squish shape to improve the fuel combustion efficiency.


c.

The piston skirt has been coated with resin to reduce the friction loss.


d.

The groove of the top ring is coated with anodic oxide to improve wear resistance and corrosion resistance.


e.

Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.


f.

Narrow-width piston rings are used to reduce weight and friction.


g.

A No. 1 compression ring with an inside bevel shape is used.


h.

A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring in order to improve its wear resistance.


i.

On the models for Brazil, a chrome plating is applied to the outer surface of the No. 2 compression ring.

W111597
1.5,0.271 1.688,0.271 1.688,0.271 1.844,0.479 true 3.573,0.25 3.344,0.25 3.344,0.25 3.198,0.458 true 1.344,0.917 1.521,0.917 1.521,0.917 1.813,0.771 true 1.344,1.396 1.521,1.396 1.521,1.396 1.813,1.25 true 2.021,1.656 2.135,1.656 2.135,1.656 2.25,1.406 true 5.115,0.333 5.229,0.135 5.229,0.135 5.385,0.135 true 6.781,0.771 6.844,0.635 6.844,0.635 6.948,0.635 true 5.24,0.635 5.115,0.635 5.115,0.635 5.01,0.448 true 5.177,1.146 5,1.146 5,1.146 4.896,0.958 true 5.083,1.667 4.927,1.667 4.927,1.667 4.833,1.531 true 6.594,1.115 6.417,1.115 6.417,1.115 6.313,0.927 true 1.844,1.563 2.156,1.719 0.313,0.156 10 *1 5.292,0.563 5.604,0.719 0.313,0.156 10 *2 5.24,1.052 5.719,1.208 0.479,0.156 10 *3 (*A) 5.135,1.563 5.448,1.719 0.313,0.156 10 *4 1.302,0.177 1.615,0.333 0.313,0.156 10 *a 1.146,0.833 1.458,0.99 0.313,0.156 10 *b 1.188,1.292 1.5,1.448 0.313,0.156 10 *c 5.417,0.063 5.729,0.219 0.313,0.156 10 *d 3.604,0.167 3.917,0.323 0.313,0.156 10 *a 6.646,1.031 7.115,1.229 0.469,0.198 10 *3 (*B) 6.969,0.552 7.146,0.76 0.177,0.208 10 *e
*A Except Models for Brazil *B Models for Brazil
*1 Piston *2 No. 1 Compression Ring
*3 No. 2 Compression Ring *4 Oil Ring
*a Taper Squish Shape *b Anodic Oxide Coating
*c Resin Coating *d PVD Coating
*e Chrome Plating - -