Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT AND BEARING  


CONSTRUCTION


a.

The crankshaft is made of micro-alloyed steel. It has 5 journals and 8 balance weights.


b.

A balance shaft drive gear is provided for the crankshaft.


c.

The lining surface of the crankshaft bearing has been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.


d.

The oil groove on the crankshaft bearing is made eccentric to reduce the amount of oil leakage from the bearing. This enables the capacity of the oil pump to be reduced in order to achieve a low friction operation.

W111541
1.74,2.063 1.948,2.063 1.948,2.063 2.052,1.833 true 1.344,0.333 1.646,0.333 1.646,0.333 1.813,0.823 true 2.708,2.083 2.875,2.083 2.875,2.083 3.052,1.896 true 6.271,1.854 6,1.854 6,1.854 5.844,1.167 true 4.76,2.156 4.531,2.156 4.531,2.156 4.375,1.844 true 3.771,2.24 3.583,2.24 3.583,2.24 3.469,2.417 true 3.979,3.656 3.792,3.656 3.792,3.656 3.573,3.49 true 2.208,2.938 2.375,2.938 2.375,2.938 2.792,2.583 true 4.917,2.396 4.708,2.396 4.708,2.396 4.25,2.688 true 3.677,1.979 3.5,1.979 3.5,1.979 3.396,1.844 true 1.115,0.24 1.427,0.396 0.313,0.156 10 *1 1.542,1.979 1.854,2.135 0.313,0.156 10 *2 2.531,1.979 2.844,2.135 0.313,0.156 10 *3 3.698,1.885 4.01,2.042 0.313,0.156 10 *4 6.323,1.792 6.635,1.948 0.313,0.156 10 *5 3.802,2.167 4.115,2.323 0.313,0.156 10 *6 2.042,2.833 2.354,2.99 0.313,0.156 10 *a 4.938,2.333 5.25,2.49 0.313,0.156 10 *b 4.042,3.594 4.354,3.75 0.313,0.156 10 *7 4.802,2.083 5.115,2.24 0.313,0.156 10 *5
*1 No. 1 Journal *2 Balance Weight
*3 Balance Shaft Drive Gear *4 Crank Pin
*5 Oil Hole *6 Upper Main Bearing
*7 Lower Main Bearing - -
*a Oil Groove *b Micro-grooved