Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT  


CONSTRUCTION


a.

An oil passage is provided in the intake and exhaust camshafts in order to supply engine oil to the Dual VVT-i system.


b.

A VVT-i controller has been installed on each front of the intake and exhaust camshafts to vary the timing of the intake and exhaust valves.


c.

Together with the use of the valve rocker arm sub-assembly, the cam profile has been designed with an indented R (radius). This results in increased valve lift when the valve begins to open and finishes closing, helping to achieve enhanced output performance.


d.

A timing rotor for the camshaft position sensor is provided at each back end of the intake and exhaust camshafts.

W111544
5.208,1.156 6.104,2.49 0.896,1.333 0.938,0.771 1.115,0.771 1.115,0.771 1.271,1.031 true 2.698,2.313 2.51,2.313 2.51,2.313 2.396,2 true 3.625,1.948 3.438,1.948 3.438,1.948 3.323,1.635 true 1.885,0.354 2.073,0.354 2.073,0.354 2.292,0.771 true 4.854,0.156 4.677,0.156 4.677,0.156 4.531,0.323 true 5.833,0.708 5.656,0.708 5.656,0.708 5.51,0.875 true 5.313,1.479 5.385,1.635 true 5.927,1.438 5.885,1.615 true 1.698,0.271 2.01,0.427 0.313,0.156 10 *1 0.771,0.698 1.083,0.854 0.313,0.156 10 *2 2.75,2.229 3.063,2.385 0.313,0.156 10 *3 3.635,1.875 3.948,2.031 0.313,0.156 10 *4 4.896,0.073 5.208,0.229 0.313,0.156 10 *5 5.552,2.26 5.865,2.417 0.313,0.156 10 *a 5.229,1.313 5.542,1.469 0.313,0.156 10 *b 5.875,0.635 6.188,0.792 0.313,0.156 10 *5 5.854,1.26 6.167,1.417 0.313,0.156 10 *b
*1 Intake Camshaft *2 Intake VVT-i Controller
*3 Exhaust VVT-i Controller *4 Exhaust Camshaft
*5 Timing Rotor - -
*a Cam with Indented R *b Indented R Portion of Cam (Profile)