Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

The connecting rods and caps are made of micro-alloyed steel.


b.

Plastic region tightening bolts are used on the connecting rod.


c.

The connecting rod bearings are reduced in width to reduce friction.


d.

The lining surface of the connecting rod bearing has been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.

W111540
1.448,0.854 1.625,0.854 1.625,0.854 1.906,1.073 true 1.094,2.406 1.281,2.406 1.281,2.406 1.531,2.615 true 3.604,1.406 3.781,1.406 3.781,1.406 4.063,1.625 true 4.26,0.458 4.458,0.458 4.458,0.458 4.865,0.875 true 1.302,0.771 1.615,0.927 0.313,0.156 10 *1 0.927,2.354 1.24,2.51 0.313,0.156 10 *2 3.427,1.323 3.74,1.479 0.313,0.156 10 *3 4.031,0.365 4.344,0.521 0.313,0.156 10 *a
*1 Connecting Rod *2 Plastic Region Tightening Bolt
*3 Connecting Rod Bearing - -
*a Micro-grooved - -