Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT › 2012.12–2015.04
NM3090E _51 Engine / Hybrid System _008627 2AR-FE ENGINE MECHANICAL _0048053 ENGINE UNIT GE GENERAL F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2AR-FE engine is an in-line, 4-cylinder, 2.5-liter, 16-valve DOHC engine. This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). It has been developed to achieve high performance, quietness, fuel economy and clean emissions.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(with Dual VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 2494 cm3 (152.2 cu. in.)
Bore x Stroke 90.0 x 98.0 mm (3.54 x 3.86 in.)
Compression Ratio 10.4 : 1
Max. Output (SAE-NET) 132 kW @ 6000 rpm*2
131 kW @ 6000 rpm*3
Max. Torque (SAE-NET) 233 N*m @ 4100 rpm
Valve Timing Intake Open 3° to 43° BTDC
Closed 61° to 21° ABDC
Exhaust Open 60° to 20° BBDC
Closed 4° to 44° ATDC
Spark Plug Manufacture DENSO
Type SK16HR11
Plug Gap 1.0 to 1.1 (0.039 in. to 0.043 in.)
Firing Order 1 - 3 - 4 - 2
Research Octane Number 91 or higher
Emission Regulation EURO 5*4
EURO 4*5
BRLEV*6
ULEV2*3
Engine Service Mass (Reference)*1 147 kg (324.0 lb)

*1: Weight shows the figure with oil and engine coolant fully filled.

*2: Except models for Korea

*3: Models for Korea

*4: Models for Australia, New Zealand, Argentina and Taiwan

*5: Except models for Brazil, Korea, Australia, New Zealand, Argentina and Taiwan

*6: Models for Brazil


Except Models for Korea
W111579
0.792,1.729 1.688,2.208 0.896,0.479 10 false Torque (N*m) 5.615,2.229 6.448,2.531 0.833,0.302 10 false Output (kW) 2.979,4.479 4.26,4.792 1.281,0.313 10 false Engine Speed (rpm) 1.802,1.385 2.073,1.615 0.271,0.229 10 false 240 1.802,1.552 2.073,1.781 0.271,0.229 10 false 220 1.802,1.729 2.073,1.958 0.271,0.229 10 false 200 1.802,1.906 2.073,2.135 0.271,0.229 10 false 180 1.802,2.083 2.073,2.313 0.271,0.229 10 false 160 5.302,0.604 5.573,0.833 0.271,0.229 10 false 140 5.302,1.073 5.573,1.302 0.271,0.229 10 false 120 5.302,1.542 5.573,1.771 0.271,0.229 10 false 100 5.302,2.031 5.573,2.26 0.271,0.229 10 false 80 5.302,2.49 5.573,2.719 0.271,0.229 10 false 60 5.302,2.979 5.573,3.208 0.271,0.229 10 false 40 5.302,3.458 5.573,3.688 0.271,0.229 10 false 20 5.302,3.927 5.573,4.156 0.271,0.229 10 false 0 2.281,4.208 2.479,4.438 0.198,0.229 10 false 0 2.51,4.208 2.896,4.417 0.385,0.208 10 false 1000 2.917,4.208 3.281,4.417 0.365,0.208 10 false 2000 3.302,4.208 3.667,4.417 0.365,0.208 10 false 3000 3.677,4.208 4.042,4.417 0.365,0.208 10 false 4000 4.042,4.208 4.406,4.417 0.365,0.208 10 false 5000 4.427,4.208 4.792,4.417 0.365,0.208 10 false 6000 4.813,4.208 5.177,4.417 0.365,0.208 10 false 7000

Models for Korea
W111635
0.594,1.698 1.542,2.104 0.948,0.406 10 false Torque (N*m) 5.385,2.219 6.333,2.625 0.948,0.406 10 false Output (kW) 2.906,4.448 4.24,4.792 1.333,0.344 10 false Engine Speed (rpm) 2.073,4.156 2.188,4.354 0.115,0.198 10 false 0 2.333,4.156 2.677,4.354 0.344,0.198 10 false 1000 2.708,4.156 3.052,4.354 0.344,0.198 10 false 2000 3.094,4.156 3.438,4.354 0.344,0.198 10 false 3000 3.458,4.156 3.802,4.354 0.344,0.198 10 false 4000 3.844,4.156 4.188,4.354 0.344,0.198 10 false 5000 4.219,4.156 4.563,4.354 0.344,0.198 10 false 6000 4.583,4.156 4.927,4.354 0.344,0.198 10 false 7000 1.625,2.063 1.917,2.26 0.292,0.198 10 false 160 1.625,1.875 1.917,2.073 0.292,0.198 10 false 180 1.625,1.698 1.917,1.896 0.292,0.198 10 false 200 1.625,1.51 1.917,1.708 0.292,0.198 10 false 220 1.625,1.344 1.917,1.542 0.292,0.198 10 false 240 5.083,3.438 5.375,3.635 0.292,0.198 10 false 20 5.073,3.896 5.188,4.094 0.115,0.198 10 false 0 5.083,2.948 5.375,3.146 0.292,0.198 10 false 40 5.083,2.479 5.375,2.677 0.292,0.198 10 false 60 5.083,2 5.375,2.198 0.292,0.198 10 false 80 5.083,1.063 5.375,1.26 0.292,0.198 10 false 120 5.083,1.521 5.375,1.719 0.292,0.198 10 false 100 5.083,0.563 5.375,0.76 0.292,0.198 10 false 140


MAIN FEATURES


a.

The following performance features have been achieved for the 2AR-FE engine through the use of the items listed below:

i.

High performance and reliability


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions and fuel economy

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover sub-assembly made of magnesium alloy is used. - - ○ - -
A taper squish shape is used for the combustion chamber. ○ - - - ○
Spiny-type liners are used in the cylinder bores. ○ - ○ - ○
A cylinder block water jacket spacer is used. ○ - - - ○
The piston skirt is coated with resin. ○ ○ - - ○
Low tension piston rings are used. ○ - - - ○
A resin gear balance shaft is used. - ○ ○ - -
Valve Mechanism A timing chain and chain tensioner are used. - ○ - ○ -
Valve lash adjuster assemblies are used. - ○ - ○ -
Valve rocker arm sub-assemblies are used. ○ - - - ○
Lubrication System An oil filter with a replaceable element is used. - - - ○ -
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System A charcoal filter is used in the air cleaner cap.*1 - - - - ○
An intake manifold made of plastic is used. - - ○ - -
A linkless-type throttle body assembly is used. - - ○ ○ ○
A thin-wall ceramic Three-Way Catalyst (TWC) is used. - - - - ○
Fuel System A fuel returnless system is used. - - ○ ○ ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - ○ ○ ○
12-hole type fuel injector assemblies with high atomizing performance are used. ○ - - - ○
Serpentine Belt Drive System A serpentine belt drive system is used. - - ○ ○ -
Engine Control System Long-reach type iridium-tipped spark plugs are used. ○ - - ○ ○
The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
An Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
A Dual Variable Valve Timing-intelligent (Dual VVT-i) system is used. ○ - - - ○
An Acoustic Control Induction System (ACIS) is used. ○ - - - ○
A tumble control system is used.*1 ○ - - - ○
A starter control (cranking hold function) is used.*2 ○ - - - -

*1: Models for Brazil and Korea

*2: Models with entry and start system


HINT:

○: Applicable

-: Not applicable