Home › Engine / Hybrid System › 2AR-FE LUBRICATION › LUBRICATION SYSTEM
NM3090E _51 Engine / Hybrid System _008632 2AR-FE LUBRICATION _0048071 LUBRICATION SYSTEM GE GENERAL F

2AR-FE LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and oil passes through an oil filter.


b.

This engine has an oil return system in which the oil is force-fed to the upper cylinder head and returns to the oil pan through the oil return hole in the cylinder head.


c.

A cycloid rotor type oil pump is used. The oil pump is directly driven by the crankshaft.


d.

The Dual VVT-i system is used. This system is operated by the engine oil.

W111581
4.719,0.813 5.042,0.427 5.042,0.427 5.323,0.427 true 2.781,0.906 2.635,0.188 2.635,0.188 2.396,0.188 true 2.333,0.688 2.073,0.438 2.073,0.438 1.906,0.438 true 2.156,1.26 1.854,0.917 1.854,0.917 1.646,0.917 true 2.656,1.729 1.833,2.083 1.833,2.083 1.615,2.083 true 2.281,2.76 1.917,3.021 1.917,3.021 1.677,3.021 true 2.635,3.604 2.271,3.865 2.271,3.865 2.031,3.865 true 3.302,4.115 3.104,4.365 3.104,4.365 2.885,4.365 true 3.885,3.74 4.271,4.229 4.271,4.229 4.573,4.229 true 4.292,2.958 5.052,3.865 5.052,3.865 5.313,3.865 true 4.5,2.646 5.323,3.427 5.323,3.427 5.563,3.427 true 4.708,1.396 5.438,1.823 5.438,1.823 5.76,1.823 true 2.208,0.115 2.521,0.271 0.313,0.156 10 *1 1.719,0.365 2.031,0.521 0.313,0.156 10 *2 1.469,0.823 1.781,0.979 0.313,0.156 10 *3 1.406,2.01 1.719,2.167 0.313,0.156 10 *4 1.51,2.938 1.823,3.094 0.313,0.156 10 *5 1.833,3.781 2.146,3.938 0.313,0.156 10 *6 2.698,4.292 3.01,4.448 0.313,0.156 10 *7 4.604,4.146 4.917,4.302 0.313,0.156 10 *8 5.333,3.792 5.875,4 0.542,0.208 10 *9 (*A) 5.604,3.365 6.073,3.521 0.469,0.156 10 *10 5.406,0.354 5.875,0.51 0.469,0.156 10 *12 5.813,1.74 6.281,1.896 0.469,0.156 10 *11
*A Models for Australia and G.C.C. Countries - -
*1 Camshaft Timing Oil Control Valve Assembly (Exhaust) *2 Camshaft Timing Oil Control Valve Assembly (Intake)
*3 Intake VVT-i Controller *4 Exhaust VVT-i Controller
*5 Chain Tensioner *6 Oil Pump
*7 Oil Filter *8 Balance Shaft
*9 Oil Cooler Assembly *10 Oil Nozzle Sub-assembly
*11 Valve Lash Adjuster Assembly *12 Oil Delivery Pipe