Home › Engine / Hybrid System › 3ZR-FAE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008645 3ZR-FAE ENGINE MECHANICAL _0048054 ENGINE UNIT DE DETAILS F

3ZR-FAE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVEMATIC MECHANISM  


CONSTRUCTION


a.

The valve mechanism for the intake side uses the VALVEMATIC mechanism. The VALVEMATIC mechanism is operated by the continuously variable valve lift controller assembly.


b.

The cam on the camshaft pushes the roller arm and the oscillating cam that rotates in the same way as the roller arm. Then, the oscillating cam pushes on the valve rocker arm sub-assembly in order to open the intake valve.

W111772
1.344,1.896 0.938,1.25 0.938,1.25 0.719,1.25 true 2.677,1.885 1.99,3.271 1.99,3.271 1.771,3.271 true 2.813,1.896 3,3.448 3,3.448 3.313,3.448 true 4.156,1.833 4.344,3.385 4.344,3.385 4.656,3.385 true 4.948,0.781 5.313,0.438 5.313,0.438 5.563,0.438 true 3.323,0.552 3.635,0.708 0.313,0.156 10 *1 0.521,1.156 0.833,1.313 0.313,0.156 10 *2 1.563,3.219 1.875,3.375 0.313,0.156 10 *3 3.375,3.375 3.688,3.531 0.313,0.156 10 *4 4.677,3.313 4.99,3.469 0.313,0.156 10 *5 5.594,0.354 5.906,0.51 0.313,0.156 10 *6
*1 VALVEMATIC Mechanism *2 Continuously Variable Valve Lift Controller Assembly
*3 Oscillating Cam *4 Roller Arm
*5 Valve Rocker Arm Sub-assembly *6 Valve Rocker Arm Lost Motion Damper Sub-assembly



c.

The control shaft transmits the linear movement of the continuously variable valve lift controller assembly to the slider located inward of the roller arm and oscillating cam. Because the roller arm is held in place by the valve rocker arm lost motion damper sub-assembly, the slider's helical splines and the helical splines inside the roller arm cause the slider to rotate. As a result, the slider rotates the oscillating cam. The rotation of the oscillating cam varies continuously in order to continuously vary the amount of intake valve lift and the intake valve action angle.

W100453
1,1.479 0.792,0.979 0.792,0.979 0.583,0.979 true 3.333,1.969 2.917,0.771 2.917,0.771 2.75,0.771 true 4.333,0.25 4.167,0.25 4.167,0.25 3.833,0.667 true 4.917,3.583 4.74,3.583 4.74,3.583 3.99,2.583 true 5.177,3.167 5,3.167 5,3.167 4.25,2.167 true 5.417,2.75 5.25,2.75 5.25,2.75 4.417,1.917 true 3.833,2.198 3.417,3.5 3.417,3.5 3.25,3.5 true 0.375,0.917 0.688,1.073 0.313,0.156 10 *1 3.063,3.417 3.375,3.573 0.313,0.156 10 *2 4.969,3.531 5.281,3.688 0.313,0.156 10 *3 4.385,0.177 4.698,0.333 0.313,0.156 10 *5 2.573,0.708 2.885,0.865 0.313,0.156 10 *6 5.198,3.115 5.51,3.271 0.313,0.156 10 *4 5.479,2.677 5.792,2.833 0.313,0.156 10 *2
*1 Continuously Variable Valve Lift Controller Assembly *2 Oscillating Cam
*3 Valve Rocker Arm Sub-assembly *4 Roller Arm
*5 Valve Rocker Arm Lost Motion Damper Sub-assembly *6 Control Shaft



d.

As the continuously variable valve lift controller assembly pushes on the control shaft, the oscillating cam rotates counterclockwise as seen from the continuously variable valve lift controller assembly. As a result, the pressure exerted on the valve rocker arm sub-assembly decreases, thus reducing the amount of valve lift.

W100454
1.875,1.229 1.635,0.802 1.635,0.802 1.438,0.802 true 3.813,1.531 3.417,0.583 3.417,0.583 3.25,0.583 true 4.917,0.25 4.75,0.25 4.75,0.25 4.521,0.667 true 4.229,1.75 4,2.583 4,2.583 3.833,2.583 true 4.563,1.979 4.917,2.833 4.917,2.833 5.083,2.833 true 4.667,1.729 5.167,2.25 5.167,2.25 5.333,2.25 true 4.844,1.5 5.333,1.833 5.333,1.833 5.5,1.833 true 1.281,0.74 1.594,0.896 0.313,0.156 10 *1 3.083,0.51 3.396,0.667 0.313,0.156 10 *6 4.958,0.177 5.271,0.333 0.313,0.156 10 *5 3.667,2.51 3.979,2.667 0.313,0.156 10 *2 5.135,2.76 5.448,2.917 0.313,0.156 10 *3 5.385,2.167 5.698,2.323 0.313,0.156 10 *4 5.563,1.75 5.875,1.906 0.313,0.156 10 *2
*1 Continuously Variable Valve Lift Controller Assembly *2 Oscillating Cam
*3 Valve Rocker Arm Sub-assembly *4 Roller Arm
*5 Valve Rocker Arm Lost Motion Damper Sub-assembly *6 Control Shaft


W100460
1.177,0.25 1.427,0.25 true 2.438,0.417 2.75,0.417 true 1.167,1 1.417,1 1.417,1 1.833,0.583 true 2.344,0.823 2.583,1.333 2.583,1.333 2.75,1.333 true 1.021,0.177 1.333,0.333 0.313,0.156 10 *1 2.802,0.323 3.115,0.479 0.313,0.156 10 *2 0.99,0.927 1.302,1.083 0.313,0.156 10 *3 2.792,1.24 3.104,1.396 0.313,0.156 10 *4 1.5,2.417 1.813,2.573 0.313,0.156 10 *a 4.917,2.344 5.229,2.5 0.313,0.156 10 *b
*1 Cam *2 Oscillating Cam
*3 Roller Arm *4 Valve Rocker Arm Sub-assembly
*a Initial Position *b Minimum Amount of Valve Lift



e.

As the continuously variable valve lift controller assembly pulls on the control shaft, the oscillating cam rotates clockwise as seen from the continuously variable valve lift controller assembly. As a result, the pressure exerted on the valve rocker arm sub-assembly increases, thus increasing the amount of valve lift.

W100455
3.885,2.5 4.052,2.5 4.052,2.5 4.219,1.75 true 3.333,0.75 3.5,0.75 3.5,0.75 3.792,1.552 true 4.417,0.604 4.583,0.25 4.583,0.25 4.75,0.25 true 4.5,2 4.917,2.75 4.917,2.75 5.083,2.75 true 4.583,1.75 5.25,2.417 5.25,2.417 5.417,2.417 true 4.854,1.625 5.417,2 5.417,2 5.583,2 true 1.927,1.25 1.688,0.771 1.688,0.771 1.406,0.771 true 1.229,0.698 1.542,0.854 0.313,0.156 10 *1 3.167,0.688 3.479,0.844 0.313,0.156 10 *6 4.792,0.188 5.104,0.344 0.313,0.156 10 *5 3.719,2.438 4.031,2.594 0.313,0.156 10 *2 5.135,2.677 5.448,2.833 0.313,0.156 10 *3 5.458,2.344 5.771,2.5 0.313,0.156 10 *4 5.625,1.927 5.938,2.083 0.313,0.156 10 *2
*1 Continuously Variable Valve Lift Controller Assembly *2 Oscillating Cam
*3 Valve Rocker Arm Sub-assembly *4 Roller Arm
*5 Valve Rocker Arm Lost Motion Damper Sub-assembly *6 Control Shaft


W100461
1.167,0.25 1.385,0.25 true 2.375,0.417 2.667,0.417 true 1.167,1 1.333,1 1.333,1 1.76,0.583 true 2.271,0.833 2.521,1.25 2.521,1.25 2.688,1.25 true 0.979,0.177 1.292,0.333 0.313,0.156 10 *1 2.708,0.333 3.021,0.49 0.313,0.156 10 *2 1,0.927 1.313,1.083 0.313,0.156 10 *3 2.719,1.167 3.031,1.323 0.313,0.156 10 *4 1.5,2.177 1.813,2.333 0.313,0.156 10 *a 4.917,2.167 5.229,2.323 0.313,0.156 10 *b
*1 Cam *2 Oscillating Cam
*3 Roller Arm *4 Valve Rocker Arm Sub-assembly
*a Initial Position *b Maximum Amount of Valve Lift