Home › Engine / Hybrid System › 3ZR-FE ENGINE CONTROL › SFI SYSTEM
NM3090E _51 Engine / Hybrid System _008636 3ZR-FE ENGINE CONTROL _0048052 SFI SYSTEM CO CONTROL F

3ZR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 43° and 40° respectively (of Crankshaft Angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy, and reducing exhaust emissions.

W110943
1.26,1.073 1.573,1.229 0.313,0.156 10 *1 2.01,1.323 2.323,1.479 0.313,0.156 10 *2 3.417,0.781 3.729,0.938 0.313,0.156 10 *3 4.219,1.031 4.531,1.188 0.313,0.156 10 *4 4.094,2.271 4.406,2.427 0.313,0.156 10 *5 0.885,3.833 1.198,3.99 0.313,0.156 10 *6 5.313,2.188 5.625,2.344 0.313,0.156 10 *7 5.646,3.594 5.958,3.75 0.313,0.156 10 *8
*1 Camshaft Timing Oil Control Valve Assembly (Exhaust) *2 Camshaft Timing Oil Control Valve Assembly (Intake)
*3 Camshaft Position Sensor (Exhaust) *4 Camshaft Position Sensor (Intake)
*5 Engine Coolant Temperature Sensor *6 Crank Position Sensor
*7 ECM *8
·

Intake Mass Air Flow Meter Sub-assembly

·

Throttle Position Sensor




W111630
4.094,3.469 4.313,3.635 4.313,3.635 5.01,3.635 true 2.25,1.385 2.625,1.385 2.625,1.385 3.146,1.521 true 4.563,3.302 5.021,3.5 0.458,0.198 10 false 51° 3.448,1.031 3.823,1.302 0.375,0.271 10 false TDC 3.427,3.865 3.802,4.135 0.375,0.271 10 false BDC 5.052,3.542 7.083,4.01 2.031,0.469 10 false Exhaust VVT-i Operation Range 0.365,1.302 2.344,1.771 1.979,0.469 10 false Intake VVT-i Operation Range 0.031,0.031 0.927,0.427 0.896,0.396 10 false Valve Timing 0.563,0.521 2.313,0.802 1.75,0.281 10 false : Intake valve opening angle 0.563,0.917 2.406,1.229 1.844,0.313 10 false : Exhaust valve opening angle 3.771,3.76 4.229,3.958 0.458,0.198 10 false 11° 2.99,3.708 3.448,3.906 0.458,0.198 10 false 22° 2.198,3.042 2.656,3.24 0.458,0.198 10 false 65° 2.531,1.49 2.99,1.688 0.458,0.198 10 false 44° 3.375,1.229 3.833,1.427 0.458,0.198 10 false 1° 3.667,1.24 4.125,1.438 0.458,0.198 10 false 3° 4.417,1.469 4.875,1.667 0.458,0.198 10 false 43°


b.

The VVT-i system delivers excellent benefits in the different operating conditions as follows:

i.

During Idling

W110937
0.49,0.094 1.656,0.406 1.167,0.313 10 : Intake 0.49,0.427 1.177,0.719 0.688,0.292 10 : Exhaust 3.479,0.073 3.833,0.302 0.354,0.229 10 TDC 3.458,1.542 3.854,1.76 0.396,0.219 10 BDC 1.521,0.354 3.083,0.656 1.563,0.302 10 Earliest Timing (Exhaust) 4.167,0.344 5.542,0.698 1.375,0.354 10 Latest Timing (Intake)

Objective Effect
Reducing overlap to reduce blow back to the intake side
·

Stabilized idling speed

·

Better fuel economy




ii.

At Light Load

W110938
0.521,0.094 1.521,0.417 1,0.323 10 : Intake 0.51,0.427 1.302,0.75 0.792,0.323 10 : Exhaust 1.448,0.458 3.083,0.781 1.635,0.323 10 Earliest Timing (Exhaust) 4.177,0.458 5.594,0.781 1.417,0.323 10 Latest Timing (Intake) 3.438,1.531 3.896,1.729 0.458,0.198 10 BDC 3.448,0.01 3.906,0.208 0.458,0.198 10 TDC

Objective Effect
Reducing overlap to reduce blow back to the intake side Ensured engine stability


iii.

At Medium Load

W110939
0.479,0.094 1.521,0.396 1.042,0.302 10 : Intake 0.469,0.438 1.469,0.76 1,0.323 10 : Exhaust 1.604,0.188 3.167,0.542 1.563,0.354 10 To Advance Side (Intake) 4.01,0.156 5.604,0.479 1.594,0.323 10 To Retard Side (Exhaust) 3.458,0.021 3.917,0.219 0.458,0.198 10 TDC 3.448,1.542 3.906,1.74 0.458,0.198 10 BDC

Objective Effect
Increasing overlap to increase internal EGR reduce pumping loss
·

Better fuel economy

·

Improved emission control




iv.

In Low to Medium Speed Range with Heavy Load

W110940
0.469,0.094 1.635,0.406 1.167,0.313 10 : Intake 0.458,0.417 1.146,0.729 0.688,0.313 10 : Exhaust 3.448,0.063 3.906,0.26 0.458,0.198 10 TDC 3.438,1.583 3.875,1.75 0.438,0.167 10 BDC 1.604,1.333 3.188,1.667 1.583,0.333 10 To Retard Side (Exhaust) 3.958,1.385 5.51,1.708 1.552,0.323 10 To Advance Side (Intake)

Objective Effect
Advancing the intake valve close timing for volumetric efficiency improvement Improved torque in low to medium speed range


v.

In High Speed Range with Heavy Load

W110941
0.49,0.083 1.688,0.406 1.198,0.323 10 : Intake 0.469,0.406 1.208,0.74 0.74,0.333 10 : Exhaust 3.458,0.063 3.781,0.229 0.323,0.167 10 TDC 3.438,1.594 3.771,1.76 0.333,0.167 10 BDC 1.771,1.354 3.219,1.729 1.448,0.375 10 To Retard Side (Intake) 3.979,1.385 5.677,1.719 1.698,0.333 10 To Advance Side (Exhaust)

Objective Effect
Retarding the intake valve close timing for volumetric efficiency improvement Improved output


vi.

At Low Temperatures

W110937
0.49,0.094 1.656,0.406 1.167,0.313 10 : Intake 0.49,0.427 1.177,0.719 0.688,0.292 10 : Exhaust 3.479,0.073 3.833,0.302 0.354,0.229 10 TDC 3.458,1.542 3.854,1.76 0.396,0.219 10 BDC 1.521,0.354 3.083,0.656 1.563,0.302 10 Earliest Timing (Exhaust) 4.167,0.344 5.542,0.698 1.375,0.354 10 Latest Timing (Intake)

Objective Effect
Reducing overlay to reduce blow back to the intake side stabilizes the idling speed at fast idle
·

Stabilized fast idle speed

·

Better fuel economy




vii.

Starting Engine and Stopping Engine

W110937
0.49,0.094 1.656,0.406 1.167,0.313 10 : Intake 0.49,0.427 1.177,0.719 0.688,0.292 10 : Exhaust 3.479,0.073 3.833,0.302 0.354,0.229 10 TDC 3.458,1.542 3.854,1.76 0.396,0.219 10 BDC 1.521,0.354 3.083,0.656 1.563,0.302 10 Earliest Timing (Exhaust) 4.167,0.344 5.542,0.698 1.375,0.354 10 Latest Timing (Intake)

Objective Effect
Reducing overlap to minimize blow back to the intake side Improved startability