Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008637 3ZR-FE ENGINE MECHANICAL _0048055 ENGINE UNIT DE DETAILS F

3ZR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD  


CONSTRUCTION


a.

The cylinder head structure has been simplified by separating the camshaft housing sub-assembly (cam journal portion) from the cylinder head sub-assembly.


b.

The cylinder head sub-assembly, which is made of aluminum, has pentroof-type combustion chambers. The spark plug is located in the center of the combustion chamber in order to improve anti-knocking performance.


c.

The angle of the intake and exhaust valves is narrowed and set at 29° to permit a compact cylinder head sub-assembly.


d.

Upright intake ports are used to achieve intake efficiency.


e.

A taper squish combustion chamber is used to improve anti-knocking performance and intake efficiency. In addition, engine performance and fuel economy have been improved.


f.

Long nozzle type fuel injector assemblies are installed in the cylinder head sub-assembly to reduce the distance from the fuel injector to intake valve. This helps prevent the fuel from adhering to the intake port walls, reducing HC exhaust emissions.

W100419
0.156,0.146 3.438,3.677 3.281,3.531 3.719,0.156 7,3.688 3.281,3.531 1.042,1.958 0.573,1.958 true 0.948,1.781 0.948,0.708 0.948,0.708 0.729,0.708 true 0.948,2.073 0.948,2.979 0.948,2.979 0.823,2.979 true 5.625,2.625 5.906,2.906 5.906,2.906 6.021,2.906 true 4.906,2.615 4.625,2.896 4.625,2.896 4.5,2.896 true 4.104,0.969 4.104,0.375 4.104,0.375 4.24,0.375 true 1.115,0.74 1.344,1.063 0.229,0.323 10 A 1.115,2.823 1.344,3.146 0.229,0.323 10 A 3.771,0.208 3.99,0.417 0.219,0.208 10 *d 0.531,0.646 0.708,0.833 0.177,0.188 10 *1 0.365,1.885 0.552,2.104 0.188,0.219 10 *2 0.646,2.896 0.813,3.094 0.167,0.198 10 *3 0.198,0.188 0.396,0.417 0.198,0.229 10 *a 1.708,0.927 1.906,1.146 0.198,0.219 10 *b 1.708,2.604 1.906,2.802 0.198,0.198 10 *c 4.26,0.292 4.479,0.531 0.219,0.24 10 *4 6.042,2.833 6.26,3.063 0.219,0.229 10 *5 4.302,2.844 4.5,3.063 0.198,0.219 10 *5 6.573,1.76 6.771,1.99 0.198,0.229 10 *b 3.885,1.927 4.083,2.146 0.198,0.219 10 *c
*1 Intake Valve *2 Spark Plug Hole
*3 Exhaust Valve *4 Camshaft Housing
*5 Taper Squish - -
*a View from Bottom Side *b Intake Side
*c Exhaust Side *d A - A Cross Section



g.

A siamese type intake port is used to reduce the overall surface area of the intake port walls. This prevents the fuel from adhering to the intake port walls, thus reducing HC exhaust emissions.

W100420
0.354,0.125 3.323,2.594 2.969,2.469 3.781,0.125 6.75,2.594 2.969,2.469 0.417,0.167 0.729,0.323 0.313,0.156 10 *a 3.844,0.167 4.156,0.323 0.313,0.156 10 *b
*a Siamese Type *b Independent Type