Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008637 3ZR-FE ENGINE MECHANICAL _0048055 ENGINE UNIT DE DETAILS F

3ZR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE LASH ADJUSTER  


CONSTRUCTION


a.

The valve lash adjuster assembly is located at the fulcrum of each valve rocker arm sub-assembly. The valve lash adjuster assembly consists primarily of a plunger, plunger spring, check ball and check ball spring.


b.

The valve lash adjuster assembly is actuated by the engine oil, plunger spring and check ball spring. The oil pressure and the spring force that act on the plunger push the valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance. This reduces the engine noise that is created during the opening and closing of the valve.

W100429
4.573,0.802 4.167,0.229 4.167,0.229 3.99,0.229 true 4.854,1.219 5.333,0.354 5.333,0.354 5.563,0.354 true 4.552,1.604 3.74,1.604 true 4.677,1.688 3.844,2.229 3.844,2.229 3.656,2.229 true 2.104,1.51 2.406,1.813 2.406,1.813 2.49,1.813 true 1.792,2.24 1.333,2.5 1.333,2.5 1.177,2.5 true 1.948,2.354 2.375,2.354 true 1.688,0.75 1.406,0.344 1.406,0.344 1.208,0.344 true 1.823,2.125 1.313,1.594 1.313,1.594 1.177,1.594 true 3.594,1.521 3.75,1.708 0.156,0.188 10 *5 2.542,1.729 2.74,1.896 0.198,0.167 10 *5 2.417,2.292 2.573,2.469 0.156,0.177 10 *4 3.792,0.156 3.948,0.302 0.156,0.146 10 *6 3.479,2.156 3.635,2.323 0.156,0.167 10 *7 5.583,0.292 5.771,0.438 0.188,0.146 10 *8 0.99,1.521 1.188,1.698 0.198,0.177 10 *2 1.01,0.24 1.177,0.406 0.167,0.167 10 *1 0.979,2.427 1.135,2.615 0.156,0.188 10 *3
*1 Plunger *2 Check Ball
*3 Check Ball Spring *4 Plunger Spring
*5 Oil Passage *6 Cam
*7 Valve Lash Adjuster Assembly *8 Valve Rocker Arm Sub-assembly