Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › ENGINE UNIT
NM3090E _51 Engine / Hybrid System _008637 3ZR-FE ENGINE MECHANICAL _0048055 ENGINE UNIT DE DETAILS F

3ZR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT  


CONSTRUCTION


a.

The intake and exhaust camshafts are made of a cast iron alloy.


b.

An oil passage is provided in the intake and exhaust camshafts in order to supply engine oil to the VVT-i system.


c.

A VVT-i controller has been installed on each front of the intake and exhaust camshafts to vary the timing of the intake and exhaust valves.


d.

Together with the use of the valve rocker arm sub-assembly, the cam profile has been designed with an indented R (radius). This results in increased valve lift when the valve begins to open and finishes closing, helping to achieve enhanced output performance.


e.

A timing rotor for the camshaft position sensor is provided at each back end of the intake and exhaust camshafts.

W100427
5.177,2.479 6.125,3.74 0.948,1.26 2.844,2 2.521,1.146 2.521,1.146 2.323,1.146 true 1.344,2.208 0.854,1.438 0.854,1.438 0.615,1.438 true 2.438,3.24 2.646,3.948 2.646,3.948 2.875,3.948 true 3.5,2.76 3.76,3.635 3.76,3.635 3.958,3.635 true 5.438,2.115 5.708,1.469 5.708,1.469 5.875,1.469 true 4.49,1.51 4.75,1.021 4.75,1.021 4.917,1.021 true 5.917,2.896 5.948,2.729 true 5.396,2.896 5.344,2.771 true 2.115,1.021 2.385,1.292 0.271,0.271 10 *1 0.417,1.385 0.625,1.594 0.208,0.208 10 *2 5.927,1.375 6.167,1.573 0.24,0.198 10 *5 2.958,3.885 3.167,4.229 0.208,0.344 10 *3 4.031,3.552 4.24,3.76 0.208,0.208 10 *4 5.885,2.531 6.104,2.719 0.219,0.188 10 *b 5.573,3.563 5.781,3.792 0.208,0.229 10 *a 5.219,2.573 5.438,2.76 0.219,0.188 10 *b 4.969,0.927 5.208,1.125 0.24,0.198 10 *5
*1 Exhaust Camshaft *2 Exhaust VVT-i Controller
*3 Intake VVT-i Controller *4 Intake Camshaft
*5 Timing Rotor - -
*a Cam with Indented R *b Indented R Portion of Cam (Profile)