Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › ENGINE UNIT › 2012.12–2015.04
NM3090E _51 Engine / Hybrid System _008637 3ZR-FE ENGINE MECHANICAL _0048055 ENGINE UNIT GE GENERAL F

3ZR-FE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 3ZR-FE engine is an in-line 4-cylinder, 2.0-liter, 16-valve DOHC engine. This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Acoustic Control Induction System (ACIS), Direct Ignition System (DIS) and Electronic Throttle Control System-intelligent (ETCS-i). These systems have been developed to realize high performance and fuel economy, and reduce exhaust emissions.


b.

A specification compatible with alcohol and high-sulfur fuel (E20-S400 ppm) is provided on some models with 3ZR-FE engine.



SPECIFICATION


No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(with Dual VVT-i)
Combustion Chamber Pentroof Type
Manifolds Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI)
Ignition System Direct Ignition System (DIS)
Displacement 1987 cm3 (121.3 cu. in.)
Bore x Stroke 80.5 mm x 97.6 mm (3.17 in. x 3.84 in.)
Compression Ratio 10.0 : 1
Max. Output (SAE-NET) 107 kW @ 6200 rpm
Max. Torque (SAE-NET) 187 N*m @ 3600 rpm
Valve Timing Intake Open 1° to 44° BTDC
Closed 65° to 22° ABDC
Exhaust Open 51° to 11° BBDC
Closed 3° to 43° ATDC
Spark Plug Manufacture DENSO
Type SC20HR11
Plug Gap 1.0 mm to 1.1 mm (0.039 in. to 0.043 in.)
Firing Order 1 - 3 - 4 - 2
Research Octane Number 91 or higher
Emission Regulation EURO 5*2
EURO 4*3
BRLEV*4
Engine Service Mass (Reference)*1 109.8 kg (242.1 lb)

*1: Weight shows the figure with oil and engine coolant fully filled.

*2: Models for Australia, New Zealand, Argentina and Taiwan

*3: Except models for Brazil, Australia, New Zealand, Argentina and Taiwan

*4: Models for Brazil


W111585
0.646,1.656 1.604,2.01 0.958,0.354 10 Torque (N*m) 5.594,1.927 6.552,2.281 0.958,0.354 10 Output (kW) 1.729,1.333 2.063,1.531 0.333,0.198 10 190 1.729,1.531 2.063,1.729 0.333,0.198 10 180 1.729,1.708 2.063,1.906 0.333,0.198 10 170 1.729,1.875 2.063,2.073 0.333,0.198 10 160 1.729,2.052 2.063,2.25 0.333,0.198 10 150 5.198,0.573 5.531,0.771 0.333,0.198 10 120 5.198,1.115 5.531,1.313 0.333,0.198 10 100 5.198,1.656 5.531,1.854 0.333,0.198 10 80 5.198,2.219 5.531,2.417 0.333,0.198 10 60 5.198,2.781 5.531,2.979 0.333,0.198 10 40 5.198,3.323 5.531,3.521 0.333,0.198 10 20 5.198,3.896 5.531,4.094 0.333,0.198 10 0 2.958,4.458 4.271,4.792 1.313,0.333 10 Engine Speed (rpm) 2.188,4.167 2.521,4.365 0.333,0.198 10 0 2.427,4.167 2.76,4.365 0.333,0.198 10 1000 2.833,4.167 3.167,4.365 0.333,0.198 10 2000 3.198,4.167 3.531,4.365 0.333,0.198 10 3000 3.583,4.167 3.917,4.365 0.333,0.198 10 4000 3.958,4.167 4.292,4.365 0.333,0.198 10 5000 4.333,4.167 4.667,4.365 0.333,0.198 10 6000 4.729,4.167 5.063,4.365 0.333,0.198 10 7000


MAIN FEATURES


a.

The following performance features have been achieved for the 3ZR-FE engine through the use of the items listed below:

i.

High performance and reliability


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions and fuel economy

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder block made of aluminum alloy is used. - - ○ - -
Spiny liners are used. ○ - - - -
The skirt portion of the piston has a resin coating applied to reduce friction. ○ ○ - - ○
Low tension piston rings are used. ○ - - - ○
Valve Mechanism A timing chain and a chain tensioner are used. - ○ - ○ -
Valve lash adjuster assemblies are used. - ○ - ○ -
Valve rocker arm sub-assemblies are used. ○ ○ - ○ -
The Dual Variable Valve Timing- intelligent (Dual VVT-i) system is used. ○ - - - ○
Cooling System Toyota Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
Intake and Exhaust System An intake manifold made of plastic is used. - - ○ - -
A stainless steel exhaust manifold is used. - - ○ - ○
Three-Way Catalysts (TWCs) are used. - - - - ○
Fuel System A fuel returnless system is used. - - ○ ○ ○
Quick connectors are used to connect the fuel hose with the fuel pipe. - - - ○ -
Serpentine Belt Drive System A serpentine belt drive system is used. ○ - ○ ○ -
Engine Control System A Magnetic Resistance Element (MRE) type camshaft position sensor is used. - - - - ○
The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. ○ - - ○ ○
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - -
The Dual Variable Valve Timing- intelligent (Dual VVT-i) is used. ○ - - - ○
The starter control is used.* ○ - - - -
The Acoustic Control Induction System (ACIS) is used. ○ - - - ○

*: Models with entry and start system


HINT:

○: Applicable

-: Not applicable