Home › Engine / Hybrid System › 3ZR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM3090E _51 Engine / Hybrid System _008639 3ZR-FE EMISSION CONTROL _0048061 EMISSION CONTROL SYSTEM CO CONTROL F

3ZR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONETS


a.

The main components of the evaporative emission control system are as follows:

Component Function
ECM Sends signals to the purge VSV to control the purge flow.
Charcoal Canister Contains activated charcoal to absorb the fuel vapor that is created in the fuel tank assembly.
Purge VSV Opens in accordance with the signals from the ECM when the system is purging, in order to send the fuel vapor that was absorbed by the charcoal canister into the intake manifold.



SYSTEM CONTROL


a.

Based on the signals from various sensors, the ECM opens and closes the purge VSV. Thus, the ECM controls the purge flow of evaporative emissions (HC) in the charcoal canister sub-assembly in accordance with the engine conditions.



FUNCTION


a.

The charcoal canister stores the fuel vapors that have been created in the fuel tank assembly.


b.

The ECM controls the purge VSV in accordance with the driving conditions in order to direct the fuel vapors into the engine, where they are burned.