Home › Power Source / Network › 2AD-FHV BATTERY / CHARGING › CHARGING SYSTEM
NM3090E _57 Power Source / Network _009052 2AD-FHV BATTERY / CHARGING _0049499 CHARGING SYSTEM DE DETAILS F

2AD-FHV BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY CURRENT SENSOR  


CONSTRUCTION


a.

The battery current sensor installed on the negative (-) terminal of the battery detects the battery charge and discharge current and calculates the battery capacity.


b.

A Hall IC is used for discharge current detection and battery charging. The Hall IC converts changes in the magnetic flux density which are caused in the core by discharge current and battery charging into voltage, and outputs them.

Y128830
6.073,1.917 4.417,1.396 true 6.146,1.865 6.458,2.021 0.313,0.156 10 *1 0.26,2.49 0.573,2.646 0.313,0.156 10 *a
*1 Battery Current Sensor - -
*a This illustration is shown as an example. - -