Home › Power Source / Network › 3ZR-FAE BATTERY / CHARGING › CHARGING SYSTEM › 2012.12–2015.04
NM3090E _57 Power Source / Network _009051 3ZR-FAE BATTERY / CHARGING _0049501 CHARGING SYSTEM DE DETAILS F

3ZR-FAE BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY CURRENT SENSOR  


CONSTRUCTION


a.

The generator control ECU assembly installed on the negative (-) terminal of the battery detects the battery charge and discharge current and calculates the battery capacity.


b.

A shunt resistor is used for detection of the charge and discharge current. The battery charge and discharge current is converted and calculated by measuring the voltage drop across the shunt resistor.

Y128831C01
3.885,1.906 6,2.333 true 6.052,2.271 6.365,2.469 0.313,0.198 10 *1 0.292,2.479 0.604,2.677 0.313,0.198 10 *a
*1 Generator Control ECU Assembly - -
*a This illustration is shown as an example. - -