Home › Drivetrain › EA64 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE SYSTEM › 2012.12–2015.10
NM3090E _52 Drivetrain _008828 EA64 MANUAL TRANSMISSION / TRANSAXLE _0050346 MANUAL TRANSAXLE SYSTEM DE DETAILS F

EA64 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  DETAILS  GEAR LAYOUT  


CONSTRUCTION


a.

The No. 1 and No. 2 output shafts are placed on the circumference of the differential ring gear.


b.

The reverse idler gear is engaged with the 1st and reverse drive gear of the input shaft and the reverse driven gear of the No. 2 output shaft.


c.

The 1st, 2nd, 3rd and 4th driven gears are located on the No. 1 output shaft.


d.

The 5th, 6th and reverse driven gears are located on the No. 2 output shaft.


e.

Triple-cone type (for 1st gear to 3rd gear), double-cone type (for 4th gear) and single-cone type (for 5th, 6th and reverse gears) synchromesh mechanisms are used to reduce the shifting effort and obtain smoother shifting.


f.

The reverse type synchromesh mechanism is used for the reverse gear to enhance the ease of operation.

X111772
1.406,2.26 0.792,0.969 true 2,2.094 2.833,1.583 true 0.479,3.177 0.99,2.667 true 1.208,3.583 1.51,2.833 true 3.198,3.385 2.813,3.104 true 5.542,0.51 5.115,0.896 true 4.573,0.865 5.104,1.302 true 4.063,1.042 4.781,1.385 true 3.802,1.281 4.375,1.406 true 3.76,1.781 5.198,2.021 true 3.76,2.292 4.448,2.292 true 3.917,3.031 4.781,2.729 true 4.188,3.385 4.885,2.823 true 4.583,3.75 5.198,2.875 true 5.365,2.74 6.552,3.031 true 5.542,2.531 6.542,2.646 true 6,2.021 6.552,1.823 true 5.521,1.573 6.552,0.896 true 0.667,0.781 0.979,0.938 0.313,0.156 10 *1 0.323,3.156 0.635,3.313 0.313,0.156 10 *2 1.083,3.604 1.396,3.76 0.313,0.156 10 *3 3.24,3.365 3.552,3.521 0.313,0.156 10 *4 2.875,1.458 3.188,1.615 0.313,0.156 10 *5 4.417,0.698 4.729,0.854 0.313,0.156 10 *6 3.896,0.927 4.208,1.083 0.313,0.156 10 *7 3.635,1.177 3.948,1.333 0.313,0.156 10 *8 3.604,1.677 3.917,1.833 0.313,0.156 10 *9 3.521,2.208 3.99,2.365 0.469,0.156 10 *10 3.677,2.958 4.146,3.115 0.469,0.156 10 *11 3.958,3.354 4.427,3.51 0.469,0.156 10 *12 4.385,3.75 4.854,3.906 0.469,0.156 10 *13 5.573,0.365 5.885,0.521 0.313,0.156 10 *2 6.604,2.979 6.917,3.135 0.313,0.156 10 *4 6.604,2.573 6.917,2.729 0.313,0.156 10 *5 6.604,1.719 6.917,1.875 0.313,0.156 10 *1 6.604,0.781 6.917,0.938 0.313,0.156 10 *3
*1 Input Shaft *2 Reverse Idler Gear
*3 No. 2 Output Shaft *4 Differential Ring Gear
*5 No. 1 Output Shaft *6 Reverse Driven Gear
*7 5th Driven Gear *8 6th Driven Gear
*9 1st and Reverse Drive Gear *10 3rd Driven Gear
*11 4th Driven Gear *12 2nd Driven Gear
*13 1st Driven Gear - -