Home › Drivetrain › EA64F MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE SYSTEM › 2012.12–2013.11
NM3090E _52 Drivetrain _008829 EA64F MANUAL TRANSMISSION / TRANSAXLE _0050347 MANUAL TRANSAXLE SYSTEM GE GENERAL F

EA64F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The EA64F 6-speed manual transaxle is used on models with 2AD-FTV engines.


b.

Gear Shift Indicator system is used except destination packages for Australia.



SPECIFICATION


Gear Ratio 1st 3.818
2nd 1.913
3rd 1.218
4th 0.880
5th 0.809
6th 0.711
Reverse 4.139
Differential Gear Ratio For 1st, 2nd, 3rd, 4th 4.312
For 5th, 6th, Reverse 3.631
Synchromesh Mechanism Type 1st, 2nd, 3rd Triple-cone
4th Double-cone
5th, 6th, Reverse Single-cone
Oil Capacity 2.1 Liters (2.2 US qts, 1.9 Imp. qts)
Oil Type TOYOTA Genuine Manual Transmission Gear Oil LV or API GL-4 and SAE 75W
Weight (Reference)* 67 kg (147.0 lb)

HINT:

*: The weight shown is when the transaxle is filled with fluid.



MAIN FEATURES


a.

This transaxle achieves a compact construction, improvement of torque transmission efficiency and excellent shift feeling due to the following items:

i.

Compact Construction

·

Twin (No. 1 and No. 2) output shafts are used.



ii.

Improvement of Torque Transmission Efficiency

·

A transmission oil separator is used.

·

A low friction bearing is used.

·

A low viscosity oil is used.



iii.

Excellent Shift Feeling

·

Multi-cone type (for 1st gear to 4th gear) and single-cone type (for 5th, 6th and reverse gears) synchromesh mechanisms are used.

·

A constant mesh type reverse gear is used.

·

Slide ball bearings are used for the shift fork shafts and shift and select lever shaft.

·

A rolling type rock ball is used for the shift and select lever shaft.

·

A shift guide plate is used for the shift and select lever shaft.





PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section:

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch Off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)