Home › Drivetrain › EB61 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE SYSTEM › 2012.12–2015.10
NM3090E _52 Drivetrain _008826 EB61 MANUAL TRANSMISSION / TRANSAXLE _0050348 MANUAL TRANSAXLE SYSTEM GE GENERAL F

EB61 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The EB61 6-speed manual transaxle is used on 2WD models with 3ZR-FE engines.


b.

Gear Shift Indicator system is used on destination packages for Russia and Ukraine.



SPECIFICATION


Gear Ratio 1st 3.833
2nd 2.047
3rd 1.303
4th 1.025
5th 0.875
6th 0.733
Reverse 3.545
Differential Gear Ratio 4.600
Synchromesh Mechanism Type 1st, 2nd Triple-cone
3rd, 4th, 5th, 6th Single-cone
Oil Capacity 2.4 Liters (2.5 US qts, 2.1 Imp. qts)
Oil Type TOYOTA Genuine Manual Transmission Gear Oil LV or API GL-4 and SAE 75W
Weight (Reference)* 50 kg (109.8 lb)

HINT:

*: The weight shown is when the transaxle is filled with fluid.



MAIN FEATURES


a.

This transaxle uses the following items to improve torque transmission efficiency and achieve an excellent shift feeling:

i.

Improvement of Torque Transmission Efficiency

·

A transmission oil separator is used.

·

A low friction bearing is used.

·

A low viscosity oil is used.



ii.

Excellent Shift Feeling

·

The shift mechanism has been optimized.

·

A triple-cone type synchromesh mechanism is used for the 1st and 2nd gears.

·

A pre-synchronizing system is used for the reverse gear.

·

A 2-step sleeve chamfer structure is used for the No. 2 transmission hub sleeve (synchromesh mechanism for the 3rd and 4th gears).





PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section:

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch Off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)