Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2012.12–2015.10
NM3090E _53 Suspension _008815 FRONT SUSPENSION _0050353 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

A low-pressure (N2) gas sealed front shock absorber assembly is used to achieve both driving stability and riding comfort.


b.

Internal friction has been reduced, thus allowing the absorber rod to move smoothly.


c.

The initial characteristic of the rebound stopper is set soft in order to ensure comfort when driving over a bump on models for G.C.C. countries and general countries.


d.

A rebound spring is used to reduce roll angle and improve roll posture on models for Australia and Europe.

HINT:

To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.


X111830
1.75,1.479 1.083,1.25 true 1.865,1.99 1.063,1.833 true 1.854,4.208 1.083,4.333 true 1.854,4.208 1.083,4.333 true 5.25,4.198 4.5,4.333 true 5.156,3.229 4.51,3.302 true 5.156,2.792 4.521,2.771 true 5.135,1.479 4.5,1.25 true 1.781,3.229 1.094,3.281 true 5.25,2.073 4.49,1.979 true 1.771,2.458 1.073,2.302 true 0.635,0.292 1.042,0.594 0.406,0.302 12 false *A: 4.021,0.302 4.427,0.573 0.406,0.271 12 false *B: 0.917,1.146 1.229,1.302 0.313,0.156 10 false *1 0.906,2.229 1.219,2.385 0.313,0.156 10 false *3 4.344,3.229 4.656,3.385 0.313,0.156 10 false *4 0.917,4.26 1.229,4.417 0.313,0.156 10 false *5 4.333,2.698 4.646,2.854 0.313,0.156 10 false *6 4.333,1.146 4.646,1.302 0.313,0.156 10 false *1 0.938,3.198 1.25,3.354 0.313,0.156 10 false *4 4.333,4.26 4.646,4.417 0.313,0.156 10 false *5 4.323,1.865 4.635,2.021 0.313,0.156 10 false *2 0.906,1.76 1.219,1.917 0.313,0.156 10 false *2
*A Models with Rebound Stopper *B Models with Rebound Spring
*1 Oil Seal *2 Absorber Rod
*3 Rebound Stopper *4 Piston Valve
*5 Base Valve *6 Rebound Spring
V100143

Oil
V100145

Low-pressure (N2) Gas



e.

The built-in rebound spring is designed to function with the suspension spring in order to restrain suspension extension during rebound. Also, in order to achieve a soft and comfortable ride, only the suspension springs are used when the suspension stroke is small during normal driving. However, when cornering, load is removed from the inner wheels, the functions of both the rebound spring and the suspension spring interact and the extension of the suspension is restrained. As a result, the vehicle has excellent maneuverability and stability.

X111831
1.146,0.823 0.969,0.469 0.969,0.469 0.781,0.469 true 1.146,1.781 0.948,1.906 0.948,1.906 0.708,1.906 true 3.24,4.844 2.823,3.979 2.823,3.979 2.635,3.979 true 1.969,0.771 2.281,1.031 0.313,0.26 10 false (b) 1.74,1.167 2.052,1.427 0.313,0.26 10 false (a) 2.323,1.083 2.635,1.344 0.313,0.26 10 false (c) 3.656,0.885 3.969,1.146 0.313,0.26 10 false (d) 3.969,0.885 4.281,1.146 0.313,0.26 10 false (e) 0.208,0.375 0.781,0.833 0.573,0.458 10 false Rebound Stopper 0.167,1.802 0.688,2.229 0.521,0.427 10 false Stopper Plate 0.74,2.865 1.969,3.219 1.229,0.354 10 false Shock Absorber in Normal Condition 2.583,2.865 3.708,3.198 1.125,0.333 10 false Shock Absorber Fully Extended 4.333,0.417 6.792,0.708 2.458,0.292 10 false (a) Rebound Spring Free Length 4.333,0.698 6.906,0.948 2.573,0.25 10 false (b) Beginning Stroke of Rebound Spring 4.333,1.031 6.833,1.25 2.5,0.219 10 false (c) Standard Length 4.333,1.365 6.833,1.583 2.5,0.219 10 false (d) Collapsed height of Rebound Spring 4.333,1.698 7.083,2.01 2.75,0.313 10 false (e) Rebound Spring Limit of Shock Absorber Stroke 0.094,3.469 4.073,3.813 3.979,0.344 10 false Characteristics of Shock Absorber with Built-in Rebound Spring 1.385,3.885 2.635,4.344 1.25,0.458 10 false Beginning Stroke of Rebound Spring 3.135,3.781 3.542,4.042 0.406,0.26 10 false Load 4.677,4.906 5.208,5.156 0.531,0.25 10 false Stroke 5.5,3.885 6.885,4.135 1.385,0.25 10 false : Entire suspension 5.5,4.208 6.885,4.458 1.385,0.25 10 false : Coil spring 5.5,4.531 6.885,4.781 1.385,0.25 10 false : Rebound spring 2.531,5.844 3.323,6.167 0.792,0.323 10 false [Rebound] 3.854,5.833 4.646,6.156 0.792,0.323 10 false [Bound] 0.167,6.01 1.344,6.313 1.177,0.302 10 false During Cornering 2.302,7.146 3.469,7.448 1.167,0.302 10 false Small Roll Angle 5.875,7.146 6.979,7.385 1.104,0.24 10 false Large Roll Angle 0.615,7.427 2.125,7.719 1.51,0.292 10 false With Rebound Spring 4.208,7.427 5.823,7.698 1.615,0.271 10 false Without Rebound Spring