Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM
NM3090E _53 Suspension _008815 FRONT SUSPENSION _0050353 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  STABILIZER BAR  


CONSTRUCTION


a.

The front stabilizer bar is hollow, reducing the weight.


b.

A ball joint is used at both ends of the front stabilizer link assembly. As a result, the ball joint performs effectively even for slight rolling and maintains a stable roll feeling.


c.

The surface of the front stabilizer bar bush installed in the front suspension cross member sub-assembly has a saddle shape. This construction, which is embedded into the cross section of the front suspension cross member sub-assembly, ensures excellent support rigidity.


d.

The front stabilizer bar bush is provided with a dust lip to prevent sand from entering.


e.

Except destination packages for Russia, the front stabilizer bar bush has a dual construction using the following materials: an outer layer made of high rigidity ordinary rubber and an inner layer made of low rigidity self-lubricating rubber. Thus, high rolling rigidity and easy installation are achieved. To reduce friction, a fluorine coating is provided in the bore diameter of the front stabilizer bar bush.

X111836
6.604,1.417 6.667,1.156 true 6.531,3.24 6.698,2.948 true 6.469,3.479 6.698,3.865 true 1.031,1.833 0.458,1.604 true 0.948,2.385 0.292,2.281 true 0.875,2.927 0.354,3.156 true 2.198,2 1.729,2.667 true 1.927,3.094 0.865,3.729 true 2.25,3.26 1.594,3.99 true 5.906,1.854 5.781,2.063 true 5.896,3.677 5.771,3.885 true 5.927,3.219 5.74,2.927 true 4.229,0.906 4.542,1.25 0.313,0.344 12 *A: 4.229,2.677 4.635,2.99 0.406,0.313 12 *B: 0.292,1.479 0.604,1.635 0.313,0.156 10 *1 0.125,2.188 0.438,2.344 0.313,0.156 10 *2 0.698,3.677 1.01,3.833 0.313,0.156 10 *3 1.438,3.958 1.75,4.115 0.313,0.156 10 *4 2.198,1.823 2.51,1.979 0.313,0.156 10 *5 5.667,2.063 5.979,2.219 0.313,0.156 10 *6 6.635,0.958 6.948,1.115 0.313,0.156 10 *7 5.615,2.76 5.927,2.917 0.313,0.156 10 *8 5.635,3.875 5.948,4.031 0.313,0.156 10 *9 6.604,3.885 7.073,4.042 0.469,0.156 10 *10 6.156,2.177 6.469,2.333 0.313,0.156 10 *a 6.188,3.969 6.5,4.125 0.313,0.156 10 *b 6.677,2.76 6.99,2.917 0.313,0.156 10 *7 0.188,3.083 0.5,3.24 0.313,0.156 10 *1
*A Destination Packages for Russia *B Except Destination Packages for Russia
*1 Ball Joint *2 Front Stabilizer Link Assembly
*3 Front Stabilizer Bar Bush *4 Front Stabilizer Bar
*5 Front Suspension Cross Member Sub-assembly *6 Self-lubricating Rubber
*7 Dust Lip *8 Inner Layer (Low Rigidity Self-lubricating Rubber)
*9 Outer Layer (High Rigidity Ordinary Rubber) *10 Fluorine Coating
*a A - A Cross Section *b B - B Cross Section