CONSTRUCTION
Integrated Input Construction Type
On models for G.C.C. countries or general countries excluding destination packages for Russia, an integrated input construction type suspension upper support is used, in which the pitch of the mounting bolts has been increased and the characteristics have been optimized.
All the inputs (from the front shock absorber, front spring bumper and front coil spring) are transmitted from the strut mounting bearing to the body via the front suspension support sub-assembly.
All the inputs (from the shock absorber, bound stopper and front coil spring) are transmitted from from the strut bearing via the suspension upper support to the body.
Separate Input Construction Type
On models for Europe or Australia or on destination packages for Russia, a separate input construction type suspension upper support is used. This construction transmits only the inputs from the shock absorber assembly and the front spring bumper to the body via the suspension support sub-assembly. Thus, the suspension upper support achieves superior quietness and ride comfort performance.
The input is transmitted from the front coil spring to the body via the strut mounting bearing.
Because the front suspension support sub-assembly receives no input from the front coil spring, the rubber can be softened, thus achieving superior quietness and ride comfort.
Through the use of urethane, the front spring bumper has been given a nonlinear stiffness characteristic (the bumper becomes progressively stiffer during operation), thus both ensuring rolling rigidity during steering and achieving ride comfort.
| *A | Integrated Input Construction Type | *B | Separate Input Construction Type |
| *1 | Front Coil Spring | *2 | Front Shock Absorber Assembly |
| *3 | Front Spring Bumper | *4 | Front Suspension Support Sub-assembly |
| *5 | Strut Mounting Bearing | - | - |
|
Front Shock Absorber Assembly Input |
|
Front Spring Bumper Input |
|
Front Coil Spring Input | - | - |