Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM3090E _54 Brake _008819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0050851 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  SPEED SENSOR  


CONSTRUCTION


a.

An active type speed sensor is used. This sensor contains a sensor IC.


b.

The magnet type sensor rotor, which consists of N and S poles that are arranged in a circle, is integrated with the hub bearing inner race.

X111926
2.635,2.719 3.729,2.552 true 0.531,4.177 1.583,4.938 true 4.073,4.219 4.74,5.229 true 0.344,3.313 0.688,3.688 0.344,0.375 12 *A: 3.917,3.302 4.229,3.615 0.313,0.313 12 *B: 2.448,2.635 2.76,2.792 0.313,0.156 10 *1 0.365,4.021 0.677,4.177 0.313,0.156 10 *2 3.958,4.031 4.271,4.188 0.313,0.156 10 *2
*A 2WD Models *B 4WD/AWD Models
*1 Front Speed Sensor *2 Rear Speed Sensor




OPERATION


a.

The active type speed sensor uses a sensor IC to detect magnetic field changes caused when the sensor rotor rotates, and the sensor outputs the detected information to the skid control ECU as digital pulses (vehicle speed signal).


b.

To detect the vehicle speed, the frequency of the output pulses is used. Because the active type sensor outputs digital pulses, it can detect vehicle speeds even when the vehicle is nearly stationary.

X100718
5.177,3.177 5.344,2.99 5.344,2.99 5.604,2.99 true 4.333,6.792 4.5,6.604 4.5,6.604 4.76,6.604 false 1.969,2.094 3.073,2.427 1.104,0.333 10 Sensor Rotor 3.896,1.271 4.615,1.552 0.719,0.281 10 Sensor IC 5.656,2.896 6.76,3.229 1.104,0.333 10 Speed Sensor 1.625,4.375 3.385,4.719 1.76,0.344 10 N and S Poles Arrangement 2.135,5.479 2.646,5.958 0.51,0.479 10 Vehicle Speed 2.135,6.542 2.646,7.021 0.51,0.479 10 Sensor Output 4.833,6.51 5.938,6.844 1.104,0.333 10 Digital Pulses 3.469,7.292 3.854,7.594 0.385,0.302 10 Time