Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2012.12–2015.10
NM3090E _54 Brake _008819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0050851 BRAKE CONTROL SYSTEM GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Auto LSD, Traction Control (TRC), Vehicle Stability Control (VSC), hill-start assist control and downhill assist control.


b.

The cooperative control with the EPS and 4WD/AWD system is used on models with VSC.



MAIN FEATURES


a.

Cooperative Control with EPS and 4WD/AWD System

i.

The cooperative control with the EPS and 4WD/AWD system uses a cooperative control function that performs integrated control of the brake control system, Electric Power Steering (EPS) system and dynamic torque control 4WD/AWD system* in accordance with driving conditions. Thus, the cooperative control with the EPS and 4WD/AWD system improves the dynamic performance of the vehicle to run, turn and stop, and ensures excellent driving stability, driveability and acceleration performance during cornering.

*: 4WD/AWD models


X111880
0.208,3.104 1.896,3.302 1.688,0.198 10 false Differential Lock Switch*1 2.146,0.74 3.125,1.229 0.979,0.49 10 false Power Steering ECU Assembly 2.24,2.26 3.083,2.771 0.844,0.51 10 false 4WD ECU Assembly*1 2.094,3.927 3.177,4.469 1.083,0.542 10 false Center Airbag Sensor Assembly 3.688,5.135 4.771,5.323 1.083,0.188 10 false CAV (V bus) 3.948,0.938 5.094,1.177 1.146,0.24 10 false Skid Control ECU 4.333,3.063 4.802,3.271 0.469,0.208 10 false ECM 5.469,0.719 7.156,0.917 1.688,0.198 10 false Speed Sensor 5.448,1.115 6.604,1.521 1.156,0.406 10 false Stop Light Switch Assembly 5.469,1.917 6.896,2.146 1.427,0.229 10 false Engine Output Control 5.469,2.333 7.156,2.531 1.688,0.198 10 false Crankshaft Position Sensor 5.469,2.99 7.156,3.188 1.688,0.198 10 false Throttle Position Sensor 5.469,3.5 7.156,3.698 1.688,0.198 10 false Accelerator Pedal Sensor Assembly 5.469,4.125 6.823,4.49 1.354,0.365 10 false Park/Neutral Position Switch Assembly*3 0.51,5.427 2.198,5.625 1.688,0.198 10 false *1: 4WD/AWD models 0.521,5.823 3.469,6.135 2.948,0.313 10 false *2: 4WD/AWD models with manual transaxle 0.469,3.479 1.844,3.688 1.375,0.208 10 false Sport Mode Switch*2 5.49,4.781 6.865,4.99 1.375,0.208 10 false Sport Mode Switch*3 0.521,6.208 3.469,6.521 2.948,0.313 10 false *3: Models with automatic transaxle or CVT 2.125,4.792 3.208,4.979 1.083,0.188 10 false Steering Sensor




PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section:

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch Off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)



b.

When the brake control system is activated, the brake pedal could shudder. This is a normal occurrence of the system in operation and should not be considered a malfunction.


c.

The TRC and VSC functions control brake hydraulic pressure and engine output to ensure vehicle stability. Therefore, operate the VSC OFF switch (stop the operation of the TRC and VSC functions) only when it is necessary.