Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM3090E _52 Drivetrain _008809 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0054837 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  ATF FILLING PROCEDURE  


CONSTRUCTION


a.

A special ATF filling procedure is used in order to improve the accuracy of the ATF level when the transaxle is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.


b.

This filling procedure uses a refill plug, an overflow plug, an ATF temperature sensor and a D indicator. For details about the ATF filling procedure, refer to the Repair Manual.

X111974
6,2.167 6,1.396 true 5.917,3.052 5.917,2.552 true 0.781,1.844 1.094,2 0.313,0.156 10 *1 5.844,3.073 6.156,3.229 0.313,0.156 10 *2 5.927,1.198 6.24,1.354 0.313,0.156 10 *a
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -
V100145

ATF - -