Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › 2012.12–2015.10
NM3090E _57 Power Source / Network _008901 NETWORKING _0058432 CAN COMMUNICATION SYSTEM GE GENERAL F

NETWORKING  CAN COMMUNICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The Controller Area Network (CAN) is a serial data communication network for real time application. It is a multiplex communication network to be equipped in a vehicle, and has communication speeds of 500 kbps (HS-CAN) and 250 kbps (MS-CAN), and the ability to detect malfunctions.


b.

The HS-CAN consists of a V bus, sub bus 15, sensor bus and local bus.


c.

The MS-CAN consists of a sub bus 1.


d.

The communication wire used is a twisted-pair wire. The bus line has a high line (2.5 V to 3.5 V of voltage is applied) and a low line (1.5 V to 2.5 V of voltage is applied).


e.

The main body ECU has a gateway function. The ECU connects the respective buses in order to establish communication between each bus.