Home › Engine / Hybrid System › 1AD-FTV STOP AND START › STOP AND START SYSTEM › 2012.12–2015.10
NM3090E _51 Engine / Hybrid System _008900 1AD-FTV STOP AND START _0058435 STOP AND START SYSTEM DE DETAILS F

1AD-FTV STOP AND START  STOP AND START SYSTEM  DETAILS  COMBINATION METER  


OPERATION


a.

The combination meter assembly receives the idling on/off signals from the engine stop and start ECU.


b.

Pressing the DISP switch several times changes the multi-information display and displays the idle stop time.

i.

Eco Odometer Display: Total idle stop time since the last time the reset was made. The reset can be performed by pressing and holding the DISP switch (total idle stop time is not erased by turning the ignition switch off).



c.

System operation status and warnings are informed to the driver by the stop and start indicator light, stop and start cancel indicator light and buzzer.

Y127787C01
1.344,1.74 1.104,0.938 true 1.156,1.75 0.698,1.031 true 2.792,2.896 2.625,2.438 true 6.427,5.573 6.26,5.115 true 1.01,0.74 1.323,0.896 0.313,0.156 10 false *1 0.563,0.854 0.875,1.01 0.313,0.156 10 false *2 2.75,2.927 3.063,3.083 0.313,0.156 10 false *3 6.385,5.604 6.698,5.76 0.313,0.156 10 false *4
*1 Stop and Start Cancel Indicator Light *2 Stop and Start Indicator Light
*3 Multi-information Display *4 DISP Switch




OPERATION


a.

Stop and Start Indicator Light Operation

Item Condition Stop and Start Indicator Light Buzzer
System Operating (Engine is stopped) The vehicle is operating normally. Illuminates Does not sound
The shift lever is operated without depressing the clutch pedal. Blinks Sounds


b.

Stop and Start Cancel Indicator Light Operation

Condition Stop and Start Indicator Light
The vehicle is stopped and system operation conditions are met. Off
While the stop and start system prevents the engine stop control from operating. Illuminates
When the ecorun cancel switch assembly is on.
Any Diagnostic Trouble Codes (DTCs) are detected. Blinks*
The number of times the starter assembly has been operated exceeds the threshold.

HINT:

*: The blinking interval is 0.5 seconds.