FUNCTION OF MAIN COMPONENTS
The main components of the blocking system have the following functions:
| Component | Function | |
|---|---|---|
| Telephone Transceiver Assembly | ·
Cancels or connects the communication between the transponder key ECU assembly and ECM. ·
Receives signals from the GPS antenna and telephone antenna. ·
Transmits a signal to the telephone antenna. |
|
| Mayday Battery | Provides power to the telephone transceiver assembly when the power supply from the vehicle battery is cut off or has deteriorated. | |
| Integration Antenna Assembly | GPS Antenna | Receives the signals from the GPS satellites and transmits the vehicle position signal to the telephone transceiver assembly. |
| Telephone Antenna | Sends and receives information to and from the call center through the Global System for Mobile communications (GSM), and transmits received information to the telephone transceiver assembly. | |
FUNCTION
| Function | Outline |
|---|---|
| Localization | Conducts vehicle localization by transmitting vehicle location data received from GPS satellites to the call center via the telephone transceiver assembly. |
| Blocking | ·
Once the user has informed the call center of a vehicle theft, the call center will transmit a blocking signal to the vehicle. Once the telephone transceiver assembly has received the blocking signal, it will activate the blocking. Communication between the transponder key ECU assembly and ECM is canceled, thus preventing the engine from starting. ·
Using information about the vehicle's location received from the GPS satellites, when the vehicle's movement is detected while the ignition switch is off, an abnormal operation notification is transmitted from the telephone transceiver assembly to the call center. |
The user can cancel the blocking function by contacting the call center.
While the blocking function is active, the engine cannot be started even though the immobiliser function has been unset. Restart the engine after the blocking function has been canceled.
DIAGNOSIS
The 5-digit DTC can be read by connecting a Global TechStream (GTS) to the DLC3. For details, refer to the Repair Manual.