Home › Drivetrain › K111 MULTIDRIVE / CVT › CVT SYSTEM
NM3090E _52 Drivetrain _008830 K111 MULTIDRIVE / CVT _0059528 CVT SYSTEM DE DETAILS F

K111 MULTIDRIVE / CVT  CVT SYSTEM  DETAILS  PULLEY AND STEEL BELT  


CONSTRUCTION


a.

The widths of the grooves of the pulleys are changed through hydraulic control.


b.

During acceleration, the action of shift solenoid valve DS1 increases the fluid inflow volume to the primary pulley, thus narrowing the width of the pulley groove.


c.

During deceleration, the action of shift solenoid valve DS2 increases the outflow volume to the primary pulley, thus widening the width of the pulley groove.


d.

The secondary pulley is hydraulically controlled by shift solenoid valve SLS. Shift solenoid valve SLS controls the belt clamping pressure to ensure proper power transmission efficiency.

X112052
4.417,1.531 4.979,1.292 true 3.49,0.677 3.833,0.417 true 2.688,0.51 3.031,0.802 true 1.719,4.99 2.063,4.823 true 2.615,3.802 2.958,3.635 true 2.51,0.354 2.823,0.51 0.313,0.156 10 *1 5.01,1.177 5.323,1.333 0.313,0.156 10 *2 3.865,0.271 4.177,0.427 0.313,0.156 10 *3 1.438,3.281 1.75,3.438 0.313,0.156 10 *a 3.917,3.292 4.229,3.448 0.313,0.156 10 *b 2.615,3.313 2.927,3.469 0.313,0.156 10 *c 5.094,3.323 5.406,3.479 0.313,0.156 10 *d 2.573,5.354 2.885,5.51 0.313,0.156 10 *d 5.104,5.365 5.417,5.521 0.313,0.156 10 *c 1.563,4.938 1.875,5.094 0.313,0.156 10 *3 3,3.521 3.313,3.677 0.313,0.156 10 *2
*1 Secondary Pulley *2 Primary Pulley
*3 Steel Belt - -
*a Pulley Ratio (Low) *b Pulley Ratio (High)
*c Groove Width (Large) *d Groove Width (Small)



e.

The primary pulley uses a double piston construction. 2 chambers generate hydraulic pressure to vary the groove width. This has resulted in a compact and lightweight assembly.

X112053C01
1.938,2.167 2.25,2.323 0.313,0.156 10 *a 5.125,2.167 5.438,2.323 0.313,0.156 10 *b
*a Pulley Ratio (Low) *b Pulley Ratio (High)
V100155

Chamber A
V100145

Chamber B



f.

The steel belt consists of elements and 2 rows of steel rings. In contrast to the chains and V-belts that transmit power through the use of tensile force, the steel belt uses the compressive action (pushing force) of the elements to transmit power.

X112054C01
1.688,2.063 1.938,1.51 true 2.635,2.24 2.479,1.76 true 4.094,2.021 3.938,1.542 true 1.573,2.073 1.885,2.229 0.313,0.156 10 *1 4.063,2.031 4.375,2.188 0.313,0.156 10 *2 2.604,2.26 2.917,2.417 0.313,0.156 10 *1
*1 Steel Ring *2 Element




OPERATION


a.

The changing of the pulley ratio is accomplished in a continuously variable manner by varying the widths of the grooves of the primary and secondary pulleys.

X100495
1.635,0.656 2.052,0.885 true 1.594,2.188 2.052,1.99 true 2.833,0.333 3.24,0.521 true 4.479,1.094 4.865,1.5 true 5.156,1.042 5.594,0.865 true 3.594,1.948 4.052,1.802 true 3.635,2.385 4.052,2.615 true 3.24,3.01 3.646,3.24 true 1.625,1.396 2.177,1.625 true 2.896,1.771 2.896,2.313 true 1.458,0.542 1.927,0.885 0.469,0.344 10 false *1 1.458,1.292 1.927,1.635 0.469,0.344 10 false *2 1.427,2.125 1.896,2.469 0.469,0.344 10 false *3 3.688,3.208 4.156,3.552 0.469,0.344 10 false *4 4.083,2.552 4.552,2.896 0.469,0.344 10 false *5 4.094,1.719 4.563,2.063 0.469,0.344 10 false *6 4.885,1.5 5.354,1.844 0.469,0.344 10 false *8 5.625,0.771 6.094,1.115 0.469,0.344 10 false *9 2.604,0.229 3.073,0.573 0.469,0.344 10 false *10 2.833,1.583 3.302,1.927 0.469,0.344 10 false *7
*1 Primary Pulley *2 Steel Belt
*3 Secondary Pulley *4 Differential Ring Gear
*5 Reduction Driven Gear *6 Reduction Drive Gear
*7 Differential Drive Pinion *8 Forward Clutch
*9 Input Shaft *10 Reverse Brake


Pulley Ratio Low (Shift Lever in D)
X100496C02
1.677,2.396 2.063,2.125 true 1.646,0.875 2.063,1.063 true 3.385,0.594 3.719,0.385 true 5.146,1.104 5.479,0.896 true 4.458,1.156 4.813,1.521 true 3.573,2.042 3.948,1.917 true 3.615,2.552 3.969,2.76 true 3.25,3.052 3.604,3.26 true 1.625,1.573 2.177,1.729 true 2.948,2.375 2.948,1.885 true 1.51,2.354 1.802,2.615 0.292,0.26 10 false *3 5.51,0.792 5.813,1.063 0.302,0.271 10 false *9 4.854,1.51 5.198,1.854 0.344,0.344 10 false *8 3.75,0.26 4.063,0.521 0.313,0.26 10 false *10 1.469,0.771 1.719,1.052 0.25,0.281 10 false *1 2.354,0.24 2.656,0.521 0.302,0.281 10 false *a 2.365,2.781 2.667,3.073 0.302,0.292 10 false *b 3.979,1.813 4.292,2.094 0.313,0.281 10 false *6 4.01,2.698 4.323,2.979 0.313,0.281 10 false *5 3.646,3.229 3.958,3.51 0.313,0.281 10 false *4 1.448,1.479 1.74,1.74 0.292,0.26 10 false *2 2.885,1.708 3.198,1.99 0.313,0.281 10 false *7
*1 Primary Pulley *2 Steel Belt
*3 Secondary Pulley *4 Differential Ring Gear
*5 Reduction Driven Gear *6 Reduction Drive Gear
*7 Differential Drive Pinion *8 Forward Clutch (On)
*9 Input Shaft *10 Reverse Brake (Off)
*a Groove Width (Large) *b Groove Width (Small)


Pulley Ratio High (Shift Lever in D)
X100497C02
1.698,1.594 2.208,1.781 true 1.646,0.875 2.073,1.052 true 3.396,0.594 3.635,0.385 true 5.156,1.104 5.396,0.896 true 4.458,1.167 4.729,1.479 true 3.583,2.042 4.073,1.938 true 3.604,2.594 4.083,2.781 true 3.208,3.135 3.688,3.323 true 1.646,2.375 2.083,2.125 true 2.938,2.385 3,1.865 true 1.531,1.479 1.854,1.802 0.323,0.323 10 false *2 5.448,0.75 6.51,1.104 1.063,0.354 10 false *9 4.76,1.469 6.344,1.823 1.583,0.354 10 false *8 3.656,0.25 3.958,0.51 0.302,0.26 10 false *10 1.458,0.76 1.708,1.042 0.25,0.281 10 false *1 2.344,2.802 2.698,3.115 0.354,0.313 10 false *b 2.344,0.229 2.615,0.521 0.271,0.292 10 false *a 4.115,1.833 4.573,2.115 0.458,0.281 10 false *6 4.135,2.719 4.594,3 0.458,0.281 10 false *5 3.74,3.26 4.198,3.542 0.458,0.281 10 false *4 1.479,2.333 1.938,2.615 0.458,0.281 10 false *3 2.948,1.667 3.406,1.948 0.458,0.281 10 false *7
*1 Primary Pulley *2 Steel Belt
*3 Secondary Pulley *4 Differential Ring Gear
*5 Reduction Driven Gear *6 Reduction Drive Gear
*7 Differential Drive Pinion *8 Forward Clutch (On)
*9 Input Shaft *10 Reverse Brake (Off)
*a Groove Width (Small) *b Groove Width (Large)


Neutral (Shift Lever in N)
X100498C02
1.656,1.688 2.146,1.823 true 1.667,0.802 2.083,1.021 true 3.385,0.573 3.583,0.354 true 4.76,1.531 4.542,1.156 true 5.135,1.104 5.469,0.906 true 1.688,2.292 2.052,2.094 true 3.229,3.063 3.594,3.219 true 3.625,2.521 3.99,2.677 true 3.573,2.021 3.938,1.823 true 2.885,2.385 2.958,1.802 true 1.479,1.594 1.76,1.813 0.281,0.219 10 false *2 3.625,3.177 3.917,3.406 0.292,0.229 10 false *4 1.521,2.24 1.781,2.458 0.26,0.219 10 false *3 3.583,0.198 3.885,0.417 0.302,0.219 10 false *10 1.479,0.708 1.75,0.958 0.271,0.25 10 false *1 2.333,0.24 2.615,0.594 0.281,0.354 10 false *a 2.333,2.802 2.594,3.01 0.26,0.208 10 false *b 4.031,2.625 4.333,2.844 0.302,0.219 10 false *5 3.969,1.74 4.271,1.958 0.302,0.219 10 false *6 4.74,1.563 5.042,1.781 0.302,0.219 10 false *8 5.51,0.823 5.813,1.042 0.302,0.219 10 false *9 2.906,1.615 3.208,1.833 0.302,0.219 10 false *7
*1 Primary Pulley *2 Steel Belt
*3 Secondary Pulley *4 Differential Ring Gear
*5 Reduction Driven Gear *6 Reduction Drive Gear
*7 Differential Drive Pinion *8 Forward Clutch (Off)
*9 Input Shaft *10 Reverse Brake (Off)
*a Groove Width (Large) *b Groove Width (Small)


Reverse (Shift Lever in R)
X100499C02
1.646,1.667 2.167,1.771 true 1.656,0.823 2.083,1.021 true 3.385,0.635 3.583,0.417 true 4.75,1.552 4.542,1.167 true 5.146,1.115 5.479,0.917 true 3.563,2.031 3.896,1.833 true 3.604,2.563 4.042,2.719 true 3.188,3.208 3.625,3.365 true 1.646,2.354 2.073,2.208 true 2.917,2.385 2.979,1.865 true 1.469,1.583 1.75,1.802 0.281,0.219 10 false *2 5.521,0.792 5.813,1.021 0.292,0.229 10 false *9 4.729,1.563 4.99,1.781 0.26,0.219 10 false *8 3.573,0.26 3.875,0.479 0.302,0.219 10 false *10 1.479,0.729 1.75,0.979 0.271,0.25 10 false *1 2.333,0.26 2.615,0.615 0.281,0.354 10 false *a 2.344,2.802 2.604,3.01 0.26,0.208 10 false *b 4.083,2.656 4.385,2.875 0.302,0.219 10 false *5 3.667,3.323 3.958,3.552 0.292,0.229 10 false *4 1.49,2.302 1.75,2.521 0.26,0.219 10 false *3 3.938,1.729 4.24,1.948 0.302,0.219 10 false *6 2.917,1.667 3.219,1.885 0.302,0.219 10 false *7
*1 Primary Pulley *2 Steel Belt
*3 Secondary Pulley *4 Differential Ring Gear
*5 Reduction Driven Gear *6 Reduction Drive Gear
*7 Differential Drive Pinion *8 Forward Clutch (Off)
*9 Input Shaft *10 Reverse Brake (On)
*a Groove Width (Large) *b Groove Width (Small)